Description :

1. Prepared and standardized a sodium solution and analytical determination of calcium concentration of the standardized solution.
2. Wrote maintenance work orders as needed and initiate documentation in accordance with equipment maintenance policy.
3. Set up, adjusted, maintained, and operated laboratory equipment.
4. Calibrated laboratory instruments to specified technical requirements.
5. Prepared chemical solutions according to standard formulas.
6. Ensured laboratory area and equipment is cleaned and organized
7. Ensured quality and confidentiality of client and company information and take an active role in updating the Quality System.

Experience

2-5 Years

Level

Junior

Education

MS

Description :

1. Ran all wet chemistry tests, maintaining data and records according to regulative requirements, entering results, inventory management of laboratory supplies, solution preparation, instrument calibration, and maintenance.
2. Answered phones, answering customer's questions (reporting results, identifying client requirements), and handle client complaints and issues.
3. Worked and performed through both verbal and written procedures.
4. Stopped work immediately when instructions were not clear/safe and provided feedback for better future practices Always used and made certain visitors were using proper personal protective equipment to safeguard against injury.
5. Accustomed to mechanical and electrical equipment and kept up to date records for maintenance.
6. Prepared samples for routine testing for food, feed, and analytical testing.
7. Performed routine quality control to ensure the quality of work.

Experience

2-5 Years

Level

Executive

Education

BS

Description :

1. Attended all required safety training and follow all safety policies and procedures.
2. Performed sample cross-sectioning, optical microscopy, X-Ray inspection, electrical probing, and various other analytical techniques to fulfill lab work requests.
3. Provided support for equipment training, preventative maintenance, and calibration.
4. Thoroughly documented all experimental data and findings in the lab database.
5. Maintained quality and timeliness of all laboratory operations.
6. Ensured appropriate lab compliance with accrediting agency and state regulations.
7. Ensured laboratory adherence to safety standards, especially in the use of hazardous chemicals.

Experience

5-7 Years

Level

Executive

Education

GED

Description :

1. Present Planned, scheduled, and conducted lab experiments which included preparing the samples, acquiring the data, checking for quality, and summarizing for interpretation for research scientists.
2. Strongly experienced in Malvern Nano Sizers, Zeta Sizers, Anton Paar SurPASS, Thermo Graphic tools like TGA, DSC, DMA, Tested solutions for pH, Conductivity.
3. Maintained all lab equipment preventive maintenance and calibration.
4. Wrote, revised, and implemented SOPs for all equipment Order lab supplies and manufacturing materials as needed or directed by Supervisor.
5. Completed and obtained approval for purchase requisitions.
6. Received, logged, and stocked material upon receipt.
7. Followed all established lab procedures both documented and undocumented.

Experience

5-7 Years

Level

Executive

Education

BS

Description :

1. Tested product, mixes, cream, and sugar to ensure they meet desired specifications.
2. Read plates for analysis after 24 hours in an incubator, initiate a hold program for the product with colonies.
3. Included retesting and communication of non-conforming products.
4. Conducted tests using an NMR and microwave scale, results are used to make adjustments for the mix makers guaranteeing product will be in the standard of company parameters and co-pack customers parameters Receiving tankers of unpasteurized cream, testing for solids and butter fats to ensure the load is in standard, acceptance, and rejection of nonconforming raw materials.
5. Planned, scheduled, and conducted lab experiments which included preparing the samples, acquiring the data, checking for quality, and summarizing for interpretation under the supervision of research scientists.
6. Strong experienced with GCMS, LCMS, HPLC, Video Contact Angle.
7. Interpreted and analyzed final results of data and reported scientific results.

Experience

2-5 Years

Level

Executive

Education

MS

Description :

1. Compiled, interpreted, and summarized data and results of GC and GCMS sample analysis.
2. Collected, generated, and finalized data results for Certificate of Analysis sample reports for the commercialization of products.
3. Maintained and operated Karl Fisher water analyzer for process and developmental samples.
4. Properly identified specific sample impurities, contents, and ingredients.
5. Maintained operation of O2 sensors in the process area facility.
6. Regularly used GC's, GPC's, IC's, LC's, and typical wet lab equipment.
7. Helped better organize our sample retention areas as well as chemical storage areas.

Experience

2-5 Years

Level

Executive

Education

Associate In Business Administration

Description :

1. Worked in Quality Control in the Analytical Lab.
2. Tested the formulas of any beverage we were running.
3. Ensured all areas were in the customer's specifications.
4. Ran alcohol which the same things are tested but, also included burning and proofing the alcohol.
5. Provided batch corrections before it hits the line.
6. Ordered products.
7. Used On the job I have to be able to run multiple types of samples simultaneously while using a bunch of different test methods.

Experience

2-5 Years

Level

Junior

Education

MS

Description :

1. Worked in the Analytical Services Center at the Curtis Bay site.
2. Tested products from the plant for physical and chemical properties in accordance with customer specifications.
3. Worked with numerous tools including Malvern Mastersizers and Total Volatility Furnaces.
4. Assigned to work with a prototype paint analysis system that tested for density and sheen of silica products that went into various paint products.
5. Standardized results of the system, called TIDAS Labman, to see if it could be successfully implemented into the lab's testing repertoire.
6. Helped to compile data from previous years and statistically analyze the fluctuations in results from year to year.
7. Worked with my supervisor to organize and present this information to plant managers so that the plant could be more accurate in their production.

Experience

2-5 Years

Level

Executive

Education

GED

Description :

1. Gained knowledge of various analytical instruments and techniques used to characterize ICL and TCL to measure their chemical properties which include: - Gas Chromatography 6850 to measure the purity of the ICL or TCL sample.
2. Measured the percentage of tar and ash.
3. Maintained all the lab equipment and inventory for three laboratories daily.
4. Ran standards twice a week on the GC, calibrated the scales once a week, and calibrated the Metrohm titrator once a week.
5. Regularly checked and changed various gas cylinders.
6. Prepared samples and solutions for various analyses.
7. Helped identify typos and errors in our written analytical methods in order to help the lab proficiency and accuracy in methodology.

Experience

5-7 Years

Level

Executive

Education

BS

Description :

1. Prepared samples in an R&D chemical lab for analysis using GC and LC Data analysis, integration, and entry.
2. Balanced calibration.
3. Waste handled and disposal according to RCRA laws Accomplishments Improved the chemical waste process.
4. Implemented a fully electronic system rather than a handwritten one.
5. Created a spreadsheet of chemicals with CAS#(reference) data, suppliers, and cost Skills Used The skill of being self-motivated and the ability to adapt to any challenge.
6. Collected daily samples from the tankers and production Conduct chemical and physical lab analyses to determine the composition and properties of foods and beverages, raw materials or ingredients, and packaging materials for research and quality.
7. Operated lab equipment according to detailed procedures and processes Enters new samples and results into computer Completes all necessary lab documentation Performs calibration and verification for all lab equipment (Acid, Brix, Vitamin C, and Calcium) Develop proficiency in making decisions on product quality.

Experience

2-5 Years

Level

Executive

Education

BS

Description :

1. Wrote standard operating procedures for all the procedures used in the analytical lab.
2. Organized and executed EDS training at my facility for myself and my team.
3. Created a common system to help track work and increase productivity in the analytical lab.
4. Used organization, planning, effective time management, teamwork, properly handling chemicals, following the standard operating procedure, and oral and written communication and public speaking skills.
5. Released material to production once tested to specification.
6. Prepared standardized solutions for equipment calibration.
7. Performed routine maintenance and ensured proper calibration of assigned instrumentation.

Experience

5-7 Years

Level

Executive

Education

Bachelor's

Description :

1. Performed quality control on Ferrous Sulfate products and Granulated Micronutrients.
2. Gathered samples of products being manufactured for analytical and physical testing.
3. Performed wet chemistry on samples following the Standard Operating Procedures for the lab.
4. Performed physical testing on samples following the Standard Operating Procedures for the lab.
5. Analyzed samples using ICP-AES, AAS, and Potassium Dichromate Titration.
6. Reported and interpreted results of analytical and physical testing.
7. Made and adjusted recipes for the material being produced in granulation based on analytical results.

Experience

5-7 Years

Level

Executive

Education

BA

Description :

1. Performed routine and non-routine samples with complex analysis.
2. Entered sample data into LIMS and reported to operations.
3. Built Data Sets and analyzed sample data using NWA Quality Analyst Trained others on the use of LIMS Maintained analytical systems by performing preventative maintenance, calibration checks, calibrations, and troubleshooting.
4. Managed raw material and product retains.
5. Reviewed and updated procedures and helped develop the SQC program.
6. Familiar with OSHA standards and EH&S Thorough knowledge of Gas Chromatography, Liquid Chromatography, Auto-Titrator, Karl-Fisher Titration, and UV-Spectrophotometer.
7. Performed testing on solid welding wire utilizing Optical Emissions Spectrograph, Leco Carbon & Sulfur Instrument, and XRF X-ray unit.

Experience

7-10 Years

Level

Management

Education

GED