A Compliance Engineer is responsible for solving all compliance issues that occur in designing and engineering. The job description entails taking responsibility for creating compliance programs and executing them and handling documentation and recommending process changes. Other common duties are listed on the Compliance Engineer Resume as – collaborating with engineers and designers to ensure that all the products are compliant; researching and analyzing current process; integrating compliance programs and ensuring their success; establishing compliance test standards, and performing diagnostic procedures; isolating non-compliance issues and pursuing resolutions; preparing and presenting compliance reports with analysis of measurements and statistics, and maintaining engineering practices throughout the lifecycle.
The nature of the job demands the following skills – knowledge of production planning and manufacturing process; experience in management; experience with product testing and analysis; the ability to communicate about technical issues both verbally and in writing. Employers often prefer candidates having an engineering degree in electrical or mechanical.
Objective : Results-oriented and self-starting Mechanical Engineer with education and experience in the oil and gas industry; currently exploring engineering roles across industries. Efficient and organized: Contributed to the achievement of 30% under job budget by performing and providing efficient and on-time drilling fluid testing results.
Skills : Excel, Word, Access, Cadence, Sharepoint, Verilog, Java, Matlab.
Description :
Provided onsite analytical and sampling services as an agent of the company holding permit, specifically performing drilling fluid and cuttings testing for major oil and gas companies as a $32B third party service company.
Conducted up to three tests per day on offshore rigs operated by leading petroleum companies.
Sampled, analyzed, and recorded ROC data for three sampling intervals in APEX software.
Documented all testing procedures and results and input information into NPDES software.
Interfaced daily with rig crew via meetings, communicated specific tasks, and outlined effects on other disciplines.
Maintained compliance with HSE regulations by ensuring rigs were free of trash and marine debris.
Calibrated and documented triple beam balance, provided controlled-copy field log from raw data and bench logs for field and onsite data, and verified calibration for ROC equipment.
Experience
2-5 Years
Level
Junior
Education
BS in Mechanical Engineering
Compliance Engineer Resume
Summary : Seeking a position that will utilize strong Electrical/Mechanical Engineering skills, Technical Skills, and Medical Technician qualifications within a company that offers career growth and advancement opportunities.
Skills : Microsoft Office, Production Management, Quality Engineering, Production Associate, Quality Control, Production Operation/Assembly.
Description :
Responsible for compliance of new products to safety standards.
Scanned new equipment for radiated and conducted emissions.
Worked with various antennas, spectrum analyzers, RF amps, signal generators.
Troubleshoot EMI Failures, testing, and applying design solutions.
Reviewed engineering drawings and Bill of Materials to create a part catalog for ROHS and REACH compliance.
Contacted suppliers to obtain full material disclosures or certificates of compliance.
Planned out testing for remaining parts.
Experience
10+ Years
Level
Senior
Education
Continuing Education
Compliance Engineer Resume
Objective : Organized Compliance Engineer with a proven track record of delivering within specified time frames. Customer-focused and strong communicator with the ability to effectively interact with others. Quick learner with management potential.
Skills : Monitoring Skills, Multitasking, MS Office.
Description :
Led Equipment Commissioning and Qualification efforts of equipment used within Active Pharmaceutical Ingredients (API) manufacturing facility.
Prepared, executed of Commissioning and Qualification documents for changes to API Process Equipment (e.g. centrifuges, reactors, etc.).
Expertised in the area helped decreased equipment qualification time from the month(s) to days.
Monitored on-going qualification and commissioning efforts through completion.
Decreased backlog on qualifications and commissioning by 50%.
Closed long-standing DIRs on qualifications and commissioning documents.
Decreased long-standing DIRs by 70%.
Responsible for the approval of Equipment Commissioning and Qualification procedures.
Experience
2-5 Years
Level
Junior
Education
BS in Chemical Engineering
Compliance Engineer Resume
Summary : A hardworking and enthusiastic Compliance Engineer with 9 years of experience in instruction. Able to learn new tasks quickly and proficient in implementing and relaying key organizational metrics. Always ready to represent the establishment with a friendly, professional demeanor at all times.
Took LED lighting product designs through the entire compliance process from start to finish obtaining a listing or recognition on the product.
Reviewed product designs for compliance with UL standards UL1598 and UL8750 and provide technical advice and assistance for issues regarding regulatory and product compliance.
Determined the necessary compliance tests needed on product designs and put together a test plan and timeline that ensures approval by market launch schedule date.
Requested appropriate tests from the internal approved Data Acceptance Program (DAP) lab, and review test data to determine passing results and compliance to the appropriate UL standard.
Prepared datasheet packages and write UL product descriptions reflecting proper components and assembly.
Submitted multiple projects on a bi-monthly basis by way of the Fast Track program for UL approval.
Worked with Engineers to resolve any issues or questions that arise related to projects submitted.
Worked in conjunction with Multiple Listing Services to multiple list products from third party manufacturers.
Requested UL quotes and opens UL projects for any projects that need to be performed on-site at UL.
Experience
7-10 Years
Level
Executive
Education
Associates in Science
Compliance Engineer Resume
Summary : Well-rounded Electric Compliance Engineer with over 9 years of experience in both EMC, and Safety/Environmental requirements. Have been involved in the compliance design and review process from pre-scans to agency approvals.
Skills : EMC/EMI/Safety, MS Office, Radio Frequency.
Description :
Radiated and conducted emissions testing and reporting.
EMC/EMI tested and reported to the EN61000-series to include harmonics and flickers.
Tested plan review for EMC compliance for military, domestic, and commercial applications.
Experienced in the nuclear environment testing for product obsolescence, new product qualification, and on-site RF-mapping.
Worked closely with the customer to find and resolve non-compliance issues to include RF-borne over-the-limit emissions.
On-site RF-mapping for RF interference mitigation and propagation.
Participated in audits as an audit team member to conduct reliability assessments.
Experience
10+ Years
Level
Senior
Education
GS
Compliance Engineer Resume
Headline : Compliance Engineer is responsible for an enterprise-wide compliance program, including but not limited to product security, data privacy, and privacy.
Skills : Mentor/ Lead, Consultant For Measurement And Laboratory Facilities.
Description :
Performed engineering production drawing audits.
Trained plant engineering technicians in all aspects of the DAPIA manual as it pertains to production drawings.
Verified the implementation of product engineering changes among manufacturing, quality control, and cost.
Verified that design and code changes are implemented at the manufacturing facilities.
Assisted plant engineering technicians with engineering production drawings when the situation warranted.
Maintained thorough knowledge of AutoCAD system.
Maintained thorough knowledge of construction codes (3280 and DAPIA).
Implemented procedures that effectively communicated engineering information to the corporate offices.
Verified the resolution of product (and process) quality issues at the root cause.
Experience
5-7 Years
Level
Executive
Education
Certification
Compliance Engineer Resume
Objective : Seeks to pursue a career where one can use knowledge of Compliance Engineering to ensure the company meets its deadlines and production dates without delays.
Skills : Management, Time Management, MS Office.
Description :
Led and developed technicians through UL standards and testing.
Interacted with hardware, software, and systems Engineers to implement new compliance requirements on new and existing controls.
Performed internal audits to meet the Client Test Data Program and ISO audits to ensure that all equipment and documentation is compliant with ISO 17025.
Coordinated and developed a plan to deliver multiple projects in a reduced timeframe.
Maintaining excellent relationships with regulatory agencies.
Identified and resolved product design issues by providing short and long-term solutions.
Product Safety, EMC, and RF compliance for radio-controlled hobby vehicles.
Experience
2-5 Years
Level
Junior
Education
BS in Electrical
Compliance Engineer Resume
Objective : A Compliance Engineer with 15+ years experience in research and development of products including 5+ years in the medical device industry. Skilled with development, implementation, and formal documentation of engineering records, test plans, procedures, and results. Tracked and reported project progress from inception through launch. Collected, analyzed, and reported test data to demonstrate project objectives.
Skills : Team Lead, Client Interaction, CRM.
Description :
Authored and revised engineering documents such as Inspection Forms, Work Procedures, User Requirements, Risk Management, Verification and Validation, and other design controls.
Ensured compliance of engineering documentation to industry and federal standards.
Tracked and reported the progress of project development from inception through launch.
Developmental and verification testing of medical devices and accessories.
Determined/documented biocompatibility and RoHS compliance of medical devices.
Performed risk analysis and risk management activities.
Prepared NERC/WECC documents and evidence for internal audits and NERC/WECC Compliance Audit.
Experience
2-5 Years
Level
Junior
Education
Mechanical Engineering
Compliance Engineer Resume
Objective : Action-oriented Critical Infrastructure Protection(CIP) Compliance expert with over 6 years' experience in professionally supporting a company's compliance efforts with federal & state disclosure reporting requirements and obligations. Thorough understanding of documentation implementation systems assuring comprehensiveness, maximizing efficiency, and ensuring legal business conduct.
Skills : Great Communication, Customer Service Leadership, and Management.
Description :
Worked as a 3rd party consultant to prove that the prime contractors were constructing the facility to the RCRA permit.
Developed documentation to track secondary containment coatings and concrete; worked to understand the prime contractor's documentation process.
Developed project management documents such as a quality control plan, a record and document management system, and a project workflow structure with achievable project milestone markers as well as end goals to efficiently and effectively organize employees' project time.
Worked offsite for HSG performing environmental compliance audits for VA hospitals and a national forest.
Responsible for compliance monitoring on all of WMATA's Capital Improvement projects ($1 billion per year).
Developed procedures, processes, user-guides, and new management tools to fit the growing needs of the transit agency.
Coordinated with field engineers and quality to obtain necessary documentation, and created an internal auditing process to ensure all items were up to specific RCRA, ASTM, and other regulatory codes.
Experience
0-2 Years
Level
Entry Level
Education
BS in Research
Compliance Engineer Resume
Objective : Seeking a rewarding and challenging Compliance Engineer position as Field Service Technician and QC, the opportunity to grow professionally vast experience in the gaming industry. Identified compliance requirements and developed the necessary tools and procedures.
Sampled, labeled, preserved, and documented COC samples for toxicity.
Ran and documented Static Sheen Test to industry standard.
Updated compliance database to include EU-required technical file format.
Performed a certification lab qualification process to consolidate lab testing processes and build test lab relationships.
Analyzed Regional Electric Compliance Standards Under Development - primarily for standards relating to System Protection of the Bulk Electric System.
Developed Online course - NERC/WECC Compliance Database Development/Sharepoint: Transmission Outage Log - Queryable version of the PSE Daily Dispatcher logs for Transmission System.
Used for NERC/WECC Electric Compliance reporting, Transmission Planning Workload Tracking - For Transmission & Distribution Engineering Group to track Planned and Unplanned work.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
