A Compressor Mechanic repairs railroad-car air compressor and compressor motors. The job duties commonly seen on the Compressor Mechanic Resume include – following wiring diagrams using hand tools; disassembling compressor and examining parts for wear or breakage; cleaning parts and installing new piston rings and wrist pins; replacing worn bearings, field coils, gears, and pinions in electric motors; reassembling compressor and connecting the compressor to compressed air and electrical outlets for testing operation.
While not mechanics work with the same type of problems, the needed skills are universally common and include the following – knowledge of maintaining and repairing all types of air compressors; mechanical and technical skills; manual dexterity; experience in installation, assembling, and disassembling parts; the ability to adhere to safety protocols; and deep experience with preventive and corrective maintenance. A relevant diploma is commonplace among job applicants.
Summary : To obtain a Compressor Mechanic position with a company that will allow growth and exercise skills learned that enables me to be a positive influence to the company with a friendly, loyal, and clearly dedicated individual who has the ambition to succeed in any given environment.
Skills : Pipeline Construction And Maintenence, Company Management, Oil Field Facility Maintenence, Heavy Equipment Operator, Management Skills.
Description :
Responsible for conducting groundwater monitoring, sampling, and monitored well maintenance programs pursuant to RCRA/TRRP long term detection monitoring protocols at RCRA permitted solid waste management units and Compliance.
Planned hazardous waste storage and processing post-closure care areas of concern, in Borger, Texas.
Conducted groundwater monitoring and sampling for pipeline release sites under the jurisdiction of the Railroad Commission of Texas.
Responsible for conducting sediment, surface water, and groundwater monitoring and sampling at designated Facility Operation Areas (FOAs) within a petroleum refinery located in Borger, Texas.
Collected data needed to evaluate and monitor the constituents of concern migration and commingled plumes from historical contamination that has resulted from process areas over time.
Monitored at the FOA boundaries drainage and receiving stream segments and within the FOAs.
Responsible for the calibration, maintenance, and use of the following field equipment to support Borger Area refinery site field activities: portable combustible gas meters, PID meters, groundwater quality meters/probes, and water level and phase-separated meters.
Responsible for collecting samples for National Emission Standard Benzene Waste Operations regulations at the petroleum refinery located in Borger, Texas.
Experience
10+ Years
Level
Senior
Education
High School Diploma
Compressor Mechanic Resume
Objective : As a Compressor Mechanic performs maintenance and repair activities on gas compression and/or process equipment, at the customer's location, as directed. Acts as a technical resource for more complex issues in the assigned area.
Skills : Air Compressors, Safety Meetings, Customer service, Communication Skills.
Description :
Worked in shop building engines for compressor stations from large to small, mainly were Waukesha\'s.
Run engine till all readings, monitors all were tested and completed before it was picked up to go be put on location.
Prepared and administered preventative maintenance work orders.
Promoted shop safety by working in a safe manner.
Repaired wiring, plumbing, equipment, and machinery.
Accurately read, understood, and carried out written instructions.
Coordinated and monitored vendor maintenance for large repairs.
Employed a wide variety of hand and power tools including hoists, drills, precision measuring instruments, and electronic testing devices.
Experience
2-5 Years
Level
Junior
Education
High School Diploma
Compressor Mechanic Resume
Objective : Seeking a position as a Compressor Mechanic where my skills and abilities can be utilized to assist in the growth of the company.
Provided preventative and corrective field mechanical service on gas compression and processed equipment on-site at client locations.
Directed, coordinated, and assisted with scheduled and unscheduled equipment repairs and maintenance.
Represented Exterran in a professional manner at all times.
Followed all Health, Safety, and Environmental procedures.
Diagnosed and repaired mechanical problems on multiple compressor systems.
Responded to emergency maintenance calls.
Responsible for submitting accurate maintenance reports and other necessary paperwork.
Maintained professional working relationships with customers and co-workers.
Experience
2-5 Years
Level
Junior
Education
Bachelor Of Science
Compressor Mechanic Resume
Summary : To obtain a Compressor Mechanic position with a natural resources company that will allow growth and exercise skills learned that also enables me to make a positive contribution to the organization. A driven and motivated leader who thrives on creative analytical thinking. Safety focused self-starter with a proven track record in exceeding the company needs and goals.
Skills : Water Pumps, Customer Service, General Maintenance.
Description :
Worked as a natural gas compressor mechanic apprentice in natural gas plants, refineries, and oil fields in various locations.
Restored to full serviceability the key components and main engine parts used in natural gas compressors and engines.
Successfully provided great attention to detail complying with safety standards, ANSI regulations, and all OSHA rules, regulations, and guidelines.
Highly trained and skilled fuel technician certified for several types of aircraft.
Operated all active inventory fuel storage and pumping stations, trucks, and refueling pits and refueling pit equipment.
Refueled/Defueled of many types of aircraft.
Trained in small aircraft towing and towing safety.
Experience
10+ Years
Level
Senior
Education
BS In Mechanic
Compressor Mechanic Resume
Summary : Seasoned employee with over twelve years of experience as a supervisor. Plant operator/Supervisor for two years in a bio-fuels facility. Completed six months of natural gas plant operator training. Journeyman electrician with over eight years of experience. Trained in numerous other manufacturing trades and fields.
Skills : Hand Tools, Diesel Engines, Cummins, Communication Skills.
Description :
Maintained gas compressors and engines.
Performed water test on the boiler. Maintained an Amine compressor kit.
Performed maintenance and service on the sulfur recovery system.
Maintained batteries and weekly tests for diesel fire suppression pump systems.
Performed numerous scheduled maintenance shutdowns.
Placed in charge of Proflow lubrication systems for all compressors at three plants.
Created oil use, loss, and total run time charts for monthly meetings.
Experience
10+ Years
Level
Senior
Education
High School Diploma
Compressor Mechanic Resume
Summary : Over 8 years of experience as a Compressor Mechanic responsible for performing maintenance and repair activities on gas compression and/or process equipment, at the customer's location, as directed.
Skills : Mechanical Problems, Maintaining, Air Filters.
Description :
Made sure compressors were well maintained, and always running in a safe proper way.
Completed overhauls on units. Took Oil sample of each unit.
Kept a daily record of all the gas being moved by each compressor and proper temperatures on all cylinders, and proper fluid levels.
Made sure all compressor locations are clean and neat at all times.
Inspected for any oil leaks on units.
Troubleshoot skills, good practical skills, and follow directions.
Worked In a safe manner, to work alone when needed but also can work well with others.
Experience
7-10 Years
Level
Consultant
Education
High School Dipolma
Compressor Mechanic Resume
Objective : To be gainfully employed with a company that will offer long term, secure employment and benefits and where my experience and work ethic will be an asset to the company.
Summary : Seeking a personally challenging Compressor Mechanic position utilizing technical experiences learned while working with rotating equipment and their systems. To put knowledge and experience to use to achieve the goals set forth by the company, while I continuously learn and grow.
Executed inspections, repairs and assembly of rotating equipment for chemical and petrochemical markets (oil free screw compressors, oil and magnetic bearing turbo expanders DH overhung compressors and more) Lead compressor builds, ensure that procedures are followed and that quality documentation is complete.
Supported Root Cause Analysis on rotor machining issues which resulted in key corrective actions leading to improved rotor delivery time, saving hundreds of hours per build.
Analyzed and troubleshoot manufacturing and assembly processes to eliminate quality concerns and improve first pass test yields.
Trained team members on new processes and procedures.
Performed various tasks including but not limited to hydro testing, seal leak consumption tests, bearing inspections, fixture checking rotors, and gears to verify engineering CTQ's.
Responsible for magnetic bearing installation, setup, and testing.
Consecutively ranked number one out of thirteen team members for three years on performance reviews.
Experience
7-10 Years
Level
Management
Education
G.E.D
Compressor Mechanic Resume
Summary : Have a strong background in mechanics and electronics. A very hands-on person with good troubleshooting skills who always striving to learn more through hands-on and training.
Skills : Natural Gas Engines, Reciprocating Compressors, Automotive Tech.
Description :
Maintained and repaired of Natural Gas Compressors Conducted maintenance and repairs for Natural Gas compressors.
Created a procedure for the maintenance team and trained technicians on bore scoping of Natural Gas turbines that are used on all units in the El Paso pipeline.
Supervised numerous engine teardowns and major overhauls.
Coordinated downtime, parts, manpower, and paperwork to ensure the job got done on scheduled time.
Maintained and repaired screw and reciprocating compressors.
Maintained and repaired Waukesha, Caterpillar, and Arrow engines used for driving compressors.
Installed test stations for cathodic protection and anodes.
Experience
7-10 Years
Level
Management
Education
High School Diploma
Compressor Mechanic Resume
Objective : As a Compressor Mechanic over 5 years of experience to provide support for recurring assessments and repair of Compressed gas Systems.
Skills : Discharge Valves, General Maintenance, Organizing Skills.
Description :
Responsible for the selection and maintenance of equipment.
Repaired and rebuilt control valves on gas processing equipment.
Maintained gas compression on well sites/gathering stations.
Prepared and maintained production reports and personnel records.
Coordinated procedures for facility and equipment maintenance or modification, including the replacement of machines.
Oversaw the production process and managed the production schedule.
Set and started working on various gas compression units.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
