Electrical Automation Engineer Resume
Objective : As an Electrical Automation Engineer, understood and worked in compliance with all health and safety rules and regulations for Stantec and its clients, made a personal commitment toward preserving the health and safety of all our employees and demonstrate commitment through your personal interactions and designs, helped us achieve our goal of zero harm within our operation and for our clients.
Skills : SCADA Systems, Electrical Circuit Design, Control Systems Design
Description :
- Worked with a team of engineers and designers in the planning and execution of project work, including scoping, asset integrity assessments, as-built documentation, feasibility studies, and detailed engineering.
- Provided technical support during construction and commissioning.
- Provided clients with engineering support to meet their needs and incorporate client suggestions for future requirements in a timely, efficient, and cost-effective manner.
- Attended client meetings, which may at times be remote, as well as corresponding directly with the client.
- Interfaced with other disciplines and departments to execute projects.
- Reviewed and analyzed of drawings for possible safety and constructability problems prior to issuance to clients.
- Provided engineering and field commissioning support for control systems designed and installed on natural gas engines, compressors and generators, along with the associated support systems including waste heat recovery systems and facility operations.
Experience
2-5 Years
Level
Executive
Education
BSc Electrical Eng
Electrical Automation Engineer Resume
Objective : As an Electrical Automation Engineer, supervised the Project Electrical Construction and provide revised and additional drawings as requested by the Construction Superintendent and the Project Engineer, worked with various clients in completing feasibility studies and detailed engineering projects for underground and surface mining operations, worked on a variety of projects both domestic and international.
Skills : SCADA, PID Control, PLC Programming, Industrial Networking
Description :
- Provided onsite technical services to external customers for the commissioning, start-up, performance testing, and troubleshooting of reciprocating compression equipment.
- Wrote detailed technical reports without grammatical errors.
- Understood basic electrical measurement principles and test equipment.
- Used small hand and power tools, and understood NEC and IEEE code for electrical systems in hazardous locations.
- Designed and implemented automated control systems for various industrial processes, enhancing efficiency and reducing operational costs significantly.
- Conducted thorough testing and troubleshooting of electrical systems, identifying issues and implementing effective solutions to minimize downtime.
- Developed and programmed PLC systems to control machinery and equipment, ensuring optimal performance and reliability in production environments.
Experience
2-5 Years
Level
Executive
Education
MSc Automation Eng
Electrical Automation Engineer Resume
Objective : As an Electrical Automation Engineer, participated in the Factory Acceptance Test (FAT) and validate electricity and automation requirements, participated in Commissioning, Qualification, Validation (CQV), contributed to the project close out, including Project Defect Analysis (PDA).
Skills : Ladder Logic, Structured Text, Automation Protocols, Project Management
Description :
- Worked settings will primarily be with reciprocating compression equipment in workshops, compression stations, process plants, etc, ensuring that they meet emissions targets set by the customer.
- Monitored critical operating data to ensure that the engine and compressor units function within the design parameters while working with mechanical and automation engineers to troubleshoot and resolve technical problems.
- Worked within confined spaces, ascendeddescended ladders, and moved items up to 50 lbs in outdoor and indoor environments.
- Fostered an environment of safety and proactively reported safety concerns, used standard Windows software such as AutoCAD to generate electrical panel layouts, schematics, and boms.
- Programmed various PLCs, embedded controllers, and operator interfaces.
- Provided engineering information and technical expertise to internal and external customers.
- Performed detailed analysis of enginecompressor control system data, and communicated to project teams with daily project reports while in the field.
Experience
2-5 Years
Level
Executive
Education
AAS Electrical Tech
Electrical Automation Engineer Resume
Headline : As an Electrical Automation Engineer, participated and validated design of the power distribution system, motor control centers, control panels, human machine interface (HMI), instrumentation, system integration, FAS architecture and commissioning and start up, contributed to establish/ write the URS (user requirement specifications) and FDS (functional design specifications) for all projects.
Skills : Python, HMI Development, System Integration, Data Acquisition Systems
Description :
- Responsible for enhancing substation reliability by 10 through thorough fault analyses.
- Collaborated with cross-functional teams to integrate automation solutions into existing manufacturing processes, improving overall productivity and safety.
- Created detailed documentation for automation projects, including system specifications, user manuals, and maintenance procedures to ensure compliance and ease of use.
- Performed regular maintenance and upgrades on automated systems, ensuring that all equipment remained up-to-date and functioned at peak efficiency.
- Provided technical support and training to operators and maintenance personnel on the use and troubleshooting of automated systems, fostering a knowledgeable workforce.
- Analyzed system performance data to identify trends and areas for improvement, leading to the implementation of enhancements that increased throughput.
- Utilized advanced software tools for simulation and modeling of electrical systems, allowing for accurate predictions of system behavior under various conditions.
Experience
5-7 Years
Level
Executive
Education
Diploma Industrial Auto
Electrical Automation Engineer Resume
Headline : As an Electrical Automation Engineer, led the design and implementation of electrical, automation, MES and digital systems, contributed to the site maintenance by providing troubleshooting efforts, develop technical documentation and specifications, participate in the procurement process, programming tasks and contribute to all phases in capital projects that require electrical engineering expertise.
Skills : AutoCAD Electrical, EPLAN, Robotics Integration, Troubleshooting
Description :
- Responsible for creating electrical schematics using AutoCAD Electrical Toolset.
- Responsible for performing in-depth electrical acceptance testing of completed hardware, including continuity and high-potential isolation testing.
- Responsible for proposing electrical product and system modifications to improve quality and efficiency.
- Responsible for monitoring manufacturing operations of electrical devices for compliance with safety protocols.
- Responsible for evaluating installed electrical equipment and systems to isolate faults and implement corrective actions.
- Responsible for collaborating successfully with cross-functional development teams to design and manufacture new consumer products.
- Responsible for preparing budgets by estimating materials, labor and construction costs.
Experience
5-7 Years
Level
Executive
Education
BEng Mechatronics
Electrical Automation Engineer Resume
Headline : As an Electrical Automation Engineer, managed all technical aspects of the plants electrical power distribution from the utility company service entrance down through switchboards, transformers, distribution panels, etc. to all individual loads, participated in the electricity and automation engineering efforts to ensure that the design, drawings and specifications meet process requirements, are cost effective, and are in accordance with good engineering practices and Nestle guidelines for all capital projects in the factory.
Skills : MATLAB, TIA Portal, Sensor Integration, Fieldbus Technologies
Description :
- Responsible for implementing and approving design control procedures for electrical development in accordance with regulatory guidelines.
- Responsible for Conducting projects and performance presentations to clients and company executives.
- Responsible for rendering technical drawings and electrical systems specifications exceeding company standards.
- Responsible for initiating project management knowledge study and subsequently standardized project management practices.
- Responsible for coordinating with vendors to identify and procure appropriate equipment necessary for project completion.
- Responsible for monitoring installation and operations to consistently meet rigorous customer requirements.
- Responsible for assisting in installation of electrical systems and components for commercial and industrial applications.
Experience
5-7 Years
Level
Executive
Education
MEng Control Systems
Electrical Automation Engineer Resume
Summary : As an Electrical Automation Engineer, acted as the sites expert on all electrical, high voltage power, controls and automation needs, while being the liaison between the factory and the corporate electrical engineering and controls experts, provided expert advice for all code and electrical safety matters for the facility.
Skills : Automation Technologies, Programming Languages, Control Theory, Electrical Testing and Measurement, Signal Processing
Description :
- Responsible for implementing automated debugging tools which reduced time spent identifying errors by 25.
- Responsible for streamlining workflows by drafting detailed part and assembly drawings in AutoCAD software.
- Responsible for identifying root cause for controls failures through design review and modification.
- Responsible for inspecting completed installations to observe operations and verify conformance to design and equipment specifications.
- Responsible for communicating with engineers and customers to discuss potential and existing engineering projects.
- Responsible for identifying specific cables, connectors, fuses, circuit breakers and other electrical devices required for installation of monitoring systems and weapons detection systems.
- Responsible for implementing cutting-edge processes and safety practices to reduce electrical construction hazards.
Experience
7-10 Years
Level
Management
Education
Cert PLC Programming
Electrical Automation Engineer Resume
Summary : As an Electrical Automation Engineer, worked closely with Group Engineering Electrical & Automation team during the planning and execution of projects, initiatives, and compliance requirements, complied with all safety and environmental regulations (Internal & External) and applicable Nestle standards.
Skills : Oscilloscopes, Multimeters, Signal Analyzers
Description :
- Responsible for evaluating and identifying opportunities to improve the performance of electrical systems.
- Responsible for evaluating project scope to estimate costs and set timelines for project delivery.
- Responsible for developing and implementing preventive maintenance and operational procedures for electrical systems.
- Responsible for designing electrical products and systems based on client briefs.
- Responsible for establishing and maintaining effective communication with clients and contractors.
- Responsible for improving methods for measurement, documentation, and workflow management.
- Responsible for retesting electrical products and systems to determine the effect of modifications.
Experience
7-10 Years
Level
Management
Education
BSc Robotics Eng
Electrical Automation Engineer Resume
Summary : As an Electrical Automation Engineer, provided optimum electrical and process control equipment facilities to meet the established objectives of the business, ensured reliability of electrical and process control hardware and software operation, optimized electrical/process control maintenance and operation costs.
Skills : Agile, Waterfall, Lean Manufacturing, Electrical Safety Standards, Machine Learning in Automation, Energy Management Systems
Description :
- Responsible for developing metrics-driven performance indicators that foster continuous improvement within both engineering and support functions.
- Responsible for collaborating with cross-functional teams to ensure successful project implementation, meeting deadlines, and budget requirements.
- Responsible for improving system efficiency by designing and implementing electrical control systems for industrial automation projects.
- Responsible for increasing plant productivity through the development of innovative automation solutions tailored to specific manufacturing processes.
- Responsible for establishing a strong rapport with vendors during specification evaluations ensuring alignment with company goals.
- Responsible for streamlining operations by creating detailed documentation of electrical designs, schematics, and procedures for future reference.
- Responsible for assisting in generating new business opportunities through participation in industry conferences showcasing expertise in Electrical and Automation Engineering.
Experience
10+ Years
Level
Senior
Education
MSc Power Systems
Electrical Automation Engineer Resume
Summary : As an Electrical Automation Engineer, optimized electrical/process control hardware and software to maintain plant at high level of efficiency, safety, quality, maintained liaisons with other departments, disciplines and facilities to provide necessary support and expertise for the execution of capital investment projects and market and global initiatives.
Skills : Troubleshooting & Diagnostics, Electrical Design & Documentation
Description :
- Responsible for completing automation of functional and regression testing, responsible for assisting maintenance personnel with complex troubleshooting.
- Responsible for supporting Engineering and Maintenance departments with training and technical support.
- Responsible for meeting with quality assurance, developers and project managers to assess scope and sequence of project.
- Responsible for training developers and quality assurance team members in automation programs and processes.
- Responsible for establishing best practices and innovative solutions to enhance production rates and output quality.
- Responsible for inspecting and assembling components and consumable parts, responsible for preparing automation concept and control drawings according to client specifications.
- Responsible for supporting facility and process equipment engineering and design, integration and validation, responsible for discussing requirements and processes with project managers and developers.
Experience
10+ Years
Level
Senior
Education
Diploma Auto Control
