Electronics Engineer Resume Samples

Description :

1. Maintained full accountability for handling a diverse range of software maintenance projects in accordance with organizational goals.
2. Applied strategic planning, prioritization, and project management skills toward consistently achieving critical deadlines while maintaining high quality standards.
3. Actively collaborated with Northrop Grumman to enhance requirements, design, code, and unit test software for the Center Instrument Display Operational Flight Program (CIDOFP), while complying with Northrop Grumman CMMI processes.
4. Created and integrated embedded systems software for real-time operating systems utilizing the C programming language and software tools such as Tornado, VxWork, CodeWright, Seawind, OpenGL, as well as using VAPS/IData as a GUI to display in the cockpit.
5. Enhanced operational performance by successfully integrating VxWorks, Seawind, and IData utilizing semaphores and OpenGL.
6. Developed a proficiency with Object Oriented (OO) design and Unified Modeling Language (UML).
7. Played a lead role in effectively improving the performance of CPU utilization for Multi-functional display by organizing task processes, OpenGL calls, and alternate graphic tools.
8. Created a diverse range of build structure templates to easily implement new functionalities.

Experience

2-5 Years

Level

Junior

Education

Electrical Engineering

Description :

1. Conduct detailed high level defect investigations to root cause, and work with responsible areas to develop and implement corrective actions.
   
2. Conduct in-depth defect analysis for completed assemblies and components to root cause level.
3. Work with senior staff to initiate brainstorming and five principles for problem solving process by way of the 5 whys.
4. Prepares detailed technical information of defect investigations for use in reports and presentations to management and customers.
5. Information required may contain some or all of the following: defect photographs, charts, outside research reference material, design of experiments results, white board meeting notes, action items lists, and outside vendor material analysis.
6. Assists senior staff with design of experiments to confirm defect analysis, repeat root cause of defect, and affectivity of corrective actions.
7. Provides basic statistical information for defect percentages related to design of experiments.

Experience

10+ Years

Level

Senior

Education

B.S. In Electrical Engineering

Description :

1. Build Custom Passive Electronic Components that include Precision LC Filters of all types from 20Hz to 40 GHz.
2. Assemble and Fine Tune electromagnetic Delay Lines, Attenuator, Amplitude and Phase Equalizers, Duplexes, Audio and Video Isolation Transformers, High Pass Filters, Low Pass Filters, Active Pass Filters, Hum Eliminators, Networks and Electronic Timing Products.
3. Read blueprints, wiring diagrams, schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
4. Maintain system logs and manuals to document testing operation of equipment.
5. Test electronics units, using standard test equipment by analyzing results to evaluate performance and determine need for adjustment.
6. Perform preventative maintenance and calibration of equipment and systems.
7. Identify and resolve equipment malfunctions, working with manufacturers and field representatives as necessary to procure replacement parts.
8. Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.

Experience

7-10 Years

Level

Management

Education

IT Technology

Description :

1. Provide systems analysis support to Langley Research Center research and technology projects.
2. Provide technical support to customers through the analysis of system performance and interface design, definition, and assessment of critical issues, independent evaluation of flight and ground system performance, and system requirements analysis.
3. Provide technical support to the Earth and Space Science Programs in the area of spacecraft analysis, including mission and performance definition assessments.
4. Conduct analytical studies of space experiments and accommodations.
5. Conduct systems studies to develop innovative concepts for space exploration and mission architectures.
6. Conduct systems studies to develop innovative concepts for space exploration and mission architectures.
7. Conduct analytical studies of space experiments and accommodations.
8. Perform systems analyses to assess the technical merit of spacecraft and mission concepts.

Experience

10+ Years

Level

Senior

Education

Electrical Engineering

Description :

1. Manufactured and built electronic boards of products and systems of Panasonic and Sony Ericson.
2. Analyzed test data and reports to determine if designs met functional and performance specifications.
3. Conducted analytical studies on engineering proposals to develop design for equipment, machines and subsystem components that were instrumental in failure analysis and engineering tests.
4. Evaluated engineering test results for possible application to development of systems and other uses.
5. Researched, developed, designed and tested electronic components, products and systems for Panasonic and Sony Ericson, as well as developed critical automation components.
6. Executed daily operations of functional test machines and fail analysis of each product.
7. Conferred with research personnel to clarify, resolve problems and develop designs.
8. Trained operators on test engineering, fixing equipment and machines for functional testing.

Experience

7-10 Years

Level

Management

Education

Control System Engineer

Description :

1. Integrated turbocharging system through to production, working with battery teams to determine battery parameters and to meet mandatory safety requirements.
2. Validated that charging functionality is as expected, collaborating with software teams and scoping USB signal integrity at the microprocessor level for troubleshooting.
3. Contributed to battery layout design, optimizing IR and thermal considerations for higher charge rate to meet efficiency specifications.
4. Wireless Charging Collaborated closely with the Subject Matter Expert for product decisions and cost evaluations.
5. Drove receiver coil design and Foreign Object Detection tuning to meet industry standards and ensure cross-compatibility.
6. Supported Qi/PMA certifications, familiar with test procedures and specifications.
7. Thermal Participated in discussions on plans and solutions for product, as well as overall portfolio.

Experience

7-10 Years

Level

Management

Education

Electrical Engineering

Description :

1. Acted as a contributing engineer for Department of State Overseas Emergency Radio Communications Project.
2. Conducted installation site surveys at 10 US embassies OCONUS as the Lead engineer with a Motorola technician.
3. Developed system design based on the site survey report.
4. Developed site survey plan for future projects Acted as a contributing engineer for High-Speed Fleet Broadcast systems.
5. Participated in weekly task review to stakeholders Review contractor deliverables to ensure project objectives were being met.
   
6. Developed training manual and quick-start manual to all personnel Supervised system installation at various sites to ensure approved installation plan was followed by the contractor.
7. Performed systems operation verification test (SOVT) after each completed system installation.

Experience

10+ Years

Level

Senior

Education

Technology Management

Description :

1. Performed system level design and analysis of airborne RF sensors.
2. Including RF link analysis, analysis of modern telecommunications system protocols, developing system architecture, developing mission CONOPs, trade studies, hardware prototyping.
3. Developed embedded Xilinx Microblaze subsystem with xilinx peripheral IP, as well as custom pcore peripherals.
4. Developed C driver code for custom pcore peripherals.
5. Maintained, modified, developed and interfaced applications (in C) for system with multiple embedded processor configurations.
6. Maintained waveform processing application included interrupt-driven IP-processor buffer interface, frame sync, FEC en/decoding, de/interleaving, payload storage and retrieval.
7. Developed waveform/payload simulation and application test harness to mimic operation of logic external to processor.

Experience

2-5 Years

Level

Junior

Education

Communications

Description :

1. Created a DOE to support results, statistically validating the repeatability and accuracy of prototype embedded strain sensors.
2. Showcased successes of embedded strain program at Motorola Labs annual exposition.
3. Prototyped IR and RF measurement systems enabling real-time participant interaction with embedded strain sensors.
4. Demonstration of embedded strain sensor technology utilized Motorola microcontrollers and assembly code.
5. Business Needs and Reliability Issue Resolution: Relieved costly line-down manufacturing situations by providing time-critical instrumentation and analysis of mechanical assembly processes.
6. Provided specific, straightforward, and easy to implement solutions to manufacturing teams.
7. Solved field failures by utilizing SEM imaging and instrumental analysis of semiconductor devices and materials.

Experience

2-5 Years

Level

Junior

Education

Master Of Business

Description :

1. Developed Local Area Network (LAN) Directive to provide guidance in the implementation of GOSIP compliant LANs under the IRS TAX System Modernization Program.
2. Developed Statement of Requirements for the Taxpayer Service Integrated Systems (TSIS) LAN.
3. Developed Migration Plan for transitioning from IRS proprietary-based Electronic Mail Systems to X.400 Electronic Mail System.
4. Reviewed contractor proposal of IRS Network Management Architecture.
5. Provided information security support for Treasury Integrated Management Information Systems.
6. Specified total quality measures for LAN Project Office related projects.
7. Participated in the IRS Total Quality Organization seminars/meetings.

Experience

2-5 Years

Level

Executive

Education

Master Of Business

Description :

1. Designs and manufactures automated systems for the TIG process pipe and tube welding.
2. General electrical and electronic design and maintenance, cost reduction and replacement of obsolete components for existing products.
3. Non-standard wiring and controls for welding fixtures such as linear and rotary stages.
4. Selection and testing for single board computers, all release documentation required for multiple products.
5. Team member for the development of 10k Watt welding power supplies.
6. Debugging and solutions for large welding installations at customer sites.
7. Design of interconnection and control boards for process automation.
8. Design of multiple output power supplies using off the shelf modules, filter boards, high current interconnection and supply boards for use in welding equipment.

Experience

10+ Years

Level

Senior

Education

BS In Business Administration

Description :

1. Performed experiments to study the propagation of high-energy laser pulses through the atmosphere.
2. Constructed one-of-a-kind electronic test equipment involving complex analog and digital circuitry.
3. Assisted in an analysis of test data and formulation of hypotheses to explain previously unobserved atmospheric phenomena.
4. Helped develop a precision frequency stabilized the laser.
5. Responsible for the design, construction, and testing of control systems used in active stabilization.
6. Worked on development of a state-of-the-art missile guidance system using laser radar.
7. Began in the conceptual design phase of the project, and followed through to test firings of prototype missiles.
8. Responsible for design and construction of the electronics package onboard the missile.

Experience

2-5 Years

Level

Executive

Education

Electrical Engineering