A Hull Technician takes responsibility for doing the metalwork that is needed to keep and maintain the shipboard structure and its surfaces in a good condition. The job description and duties listed on the Hull Technician Resume include the following – maintaining the plumbing and marine sanitation systems, repairing small boats, operating and maintaining the ballast control systems, managing the quality assurance programs; repairing installed ventilation ducts; installing and repairing insulation and lagging; operating marine sanitation systems; heat treating in hot and cold forming of metals; and fabricating metals.
In order to qualify, an applicant will require the following skills – the ability to work in extreme weather conditions, physical abilities and stamina; deep knowledge and familiarity in using all types of hand and power tools; and tolerance to high or noisy surroundings. A relevant degree or diploma is commonplace among job applicants. Qualifying ASVAB score is also needed.
Headline : Accomplished Craftsman with proven track record of maintaining superior quality control and meeting or exceeding project specifications. Knowledgeable warehouse manager. Sought out by peers and management for expert advice on time critical issues. Skilled professional in all aspects of HVAC. Knowledge in many facets of construction to include commercial and residential ground up builds and renovations; facilities maintenance, foundations, framing, finishing, HVAC, plumbing, welding, electrical, and ground work.
Performed metal work necessary to keep all types of shipboard structures and surfaces in good condition.
Maintained shipboard plumbing and marine sanitation systems, repaired small boats, and operated and maintained ballast control systems.
Welded of multiple sensitive materials onboard four Navy super welder at Naval Shipyard Portsmouth, Virginia.
Installed, maintained and repaired valves, piping, plumbing system fittings and fixtures, and marine sanitation systems.
Repaired decks, structures and hulls by welding, brazing, riveting and caulking.
Examined and tested welds and various shipboard structures using radiological, ultrasonic and magnetic particle testing equipment.
Troubleshoot and repaired boats & engines for customers and dealer stock
Experience
5-7 Years
Level
Executive
Education
Associate's
Sr. Hull Technician Resume
Summary : Obtain a full time Hull Technician position as a pipe welder and/or pipe fitter. Have many years experience including, but not limited to: MIG welding, TIG welding, SMAW, and oxy/acetylene brazing. Military qualified on high pressure pipe lines.
Certified to ASNT Standards for visual testing, liquid penetrant testing, magnetic particle testing and radiographic inspections.
Performed Visual and Penetrant tests in accordance with Mil-Std-1688 and 1689, 22 Delta, T9074-AS-GIB-010_271, NAVSEA Tech Pub 278, and the Mil-Std 2035A - NDT Acceptance Criteria on weldments of high pressure steam piping and low pressure steam drain piping located in the nuclear reactor plant of the USS John C.
Controlled and Formal Work Packages to ensure sure that QA steps and procedures were followed and that the applicable standards and materials were properly in place.
Responsible for the operation and procedures of using an Innovex XRF Metal Analyzer Gun.
Used to ensure that the correct materials were used to specifically match blueprint drawings.
Attended Basic and Advanced Firefighting Schools.
Completed Warranty repairs in a timely matter.
Experience
10+ Years
Level
Senior
Education
Diploma
Jr. Hull Technician Resume
Objective : Obtain a Hull Technician position where can further develop and utilize skills to become an asset to the organization. equires mechanical knowledge or background from marine, automotive, motorsports or heavy equipment repair.
Skills : Microsoft Windows OS XP Pro, 7 Ultimate, 10 Pro - Administrative.
Description :
Welds Ships metal parts restore decks, structures and hulls or components together, using brazing, gas, or arc welding equipment.
Fabricates with light and heavy gauge metals such as aluminum, stainless steel, brass, sheet and corrugated iron.
Repairs of broken or cracked steam pipes, fill holes and increase size of metal parts, using welding equipment.
Chips or grinds off excess weld, slag, or spatter, using hand scraper or power chipper, portable grinder, or arc-cutting equipment.
Examines, tests welds and various shipboard structures; using radiological, ultrasonic and magnetic particle testing equipment.
Efficiently performs welding repairs under extreme pressure including in the Nuclear Reactor plant.
Reviews layouts or work orders in preparation for welding or cutting metal components.
Repairs and installs plumbing fixtures.
Installs, maintains and repairs valves, piping, plumbing system fittings and fixtures, and marine sanitation systems.
Experience
2-5 Years
Level
Junior
Education
Diploma
Hull Technician I Resume
Objective : Very hard working and dedicated individual,have experience in the retail industry. Have had time in the military doing maintenance. Get along well others, while working efficiently on own. Seeking a Hull Technician position wherecan excel while giving best to an employer.
Skills : Microsoft Office Applications,, Welding, Management.
Description :
Performed metal work necessary to keep all types of shipboard structures and surfaces in good working condition while stationed in San Diego (CA), Yokosuka (Japan), and Sasebo (Japan) with multiple ship deployments in various seas.
Installed, maintained, and operated shipboard plumbing and marine sanitation systems.
Repaired small boats (to include LCACs).
Operated and maintained ballast control systems, and managed the Quality Assurance Program.
Performed pipe fitting, fabricating, welding, damage control, and fire-fighting.
Installed, maintained, and repaired valves, piping, decks, structures and hulls by welding, brazing, riveting and caulking.
Fabricated with light and heavy gauge metals such as aluminum, stainless steel, sheet copper and brass, steel, sheet and corrugated iron.
Performed heat treating, hot and cold forming of metals; pipe cutting, threading and assembly.
Repaired installed ventilation ducting; metal, wood and fiberglass boats.
Experience
2-5 Years
Level
Junior
Education
Diploma
Hull Technician II Resume
Headline : Seeking challenging work where can utilize skills and Hull Technician experience; as well as perform, enhance knowledge, and contribute to the growth of organization.
Skills : Welding, Inventory Management, Record Keeping, Management, Maintenance, HVAC.
Description :
Performed repairs to the ship's hull, plumbing and piping systems, and structural members.
Performed brazing, electrical arc welding, oxyacetylene welding and cutting, and MIG/TIG welding, repairs ship plumbing and piping systems: fabricates damage control patches, sheet metal ducting, brackets, ladders and platforms; completed maintenance data forms; ordered repair parts and tools; maintained shipboard sewage systems.
Performed gas-free testing of voids and compartments to ensure safe entry; performs repairs to ship structure using heavy gauge metal; completes maintenance reports; inspects and repairs installed equipment.
Organized and supervised damage repair parties; prepared training records.
Reviewed and completed maintenance data forms; prepared weekly maintenance schedules.
Operated, maintained and supported deep dive systems and equipment.
Worked knowledge of underwater salvage tools, construction equipment, and underwater search procedures.
Experience
5-7 Years
Level
Executive
Education
Diploma
Hull Technician III Resume
Summary : Have a vast amount of experience in construction, maintenance, welding, brazing, pipefitting, military operations, food service, hospitality, etc. all of which may not be included in this resume. Have a very flexible schedule, a lot of energy, and ready for new opportunities.
Trained as a shipboard firefighter which led to the position of Lead Firefighter, Assistant Fire Marshall and Fire Investigator.
performed rescue evacuation of pilots, passengers, and crew involved in helicopter crashes.
Performed various plumbing jobs including welding and replacing pipes, pipe laying, pipefitting and water tight door repair and replacement.
Responsible for sheet metal fabrication and installation of new shelving in officer quarters along with other unique metal cabinetry jobs.
Appointed customs petty officer and primary responsibilities consisted of inspecting sailor's luggage for illegal contraband before de-boarding after overseas exercises.
Served as a member of the ship's security team which included loading, unloading, and securing weapons and performed monthly security drills to ensure safety protocols were met.
Served as a training Petty Officer to initiate newly assigned personnel both officer and enlisted and familiarize them with ship procedures and command personnel.
Experience
7-10 Years
Level
Management
Education
A.A.S.
Asst. Hull Technician Resume
Objective : Well-Experienced commercial and industrial Service technician with mechanical, carpentry, and welding experience. Advanced skills in identifying mechanical faults and in applying appropriate repair procedures at the highest safety level. Highly adept at managing customer service operations with consistent record of meeting or exceeding all business and support goals. A team leader with hands-on experience using all tools and machinery necessary for the job.
Skills : MS Office, Management, Organizing.
Description :
Exceptionally focused and knowledgeable Fabricator Welder with a stellar customer service record and strong attention to detail.
Adept multitasker able to bring a number of welding and repair projects to completion accurately and well before deadlines.
Operated a wide variety of welding tools and equipment with the highest attention to efficiency and safety standards.
Fabricated and repaired shipboard piping systems.
Fabricated shipboard structures using many different metals, including aluminum, steel, copper and brass.
Maintained the ships engine rooms as a qualified watch stander in Propulsion Systems and Auxiliary Systems Monitor.
Organized, coordinated and trained the ship's crew on fire safety as a qualified Fire Marshall.
Experience
2-5 Years
Level
Junior
Education
Bachelor's
Associate Hull Technician Resume
Headline : To obtain a combination welding Hull Technician position that will allow the opportunity to emphasize integrity, leadership and consistency in the most demanding environment.
Skills : Repairing, technician.
Description :
Performed PMS on all firefighting equipment through out the ship.Took the draft of the ship.
Conducted tag-out/ lock-out on machinery, Valves and motors for matanice Use torch or Plas arc to cut metal used shear, break, and drill press to fabricate and complete multiple jobs.
Performed soldering, brazing and pipe fitting for needed plumbing work needed.
Wrote hot work sheet for welding jobs given using Stick, mig, and flux-core process in the vertical, Horizontal, and overhead position.
Stood watch monitoring and recording multiple gages assuring the pressure and temp was in the normal operating level.
Chipped, grinded, sandblasted and painted using brushes, roller, and paint guns and insulated and lagged to preserve ship.
In charge of monitoring all materials need for every job up to stock and ordered what was needed. Occupation health and safety specialist, Firefighter.
Experience
5-7 Years
Level
Executive
Education
Welding
Lead Hull Technician Resume
Summary : Highly dedicated and focused welder/fabricator with a strong work ethic, and exceptional attention to detail. Flexible scheduling availability to include weekends and emergency situations. Adept at working independently, or as a member of a team.
Skills : Management, Repairing.
Description :
Repaired decks, structures and hulls by welding, brazing, riveting and caulking.
Fabricated with light and heavy gauge metal such as aluminum, stainless steel, sheet copper and brass, steel, sheet and corrugated iron.
Heat treated, hot and cold forming of metals.
Tested welds and various shipboard structures; using radiological, ultrasonic and magnetic particle testing equipment.
Installed, maintaining and repairing valves, piping, plumbing system fittings and fixtures.
Responsible for high pressure welder pressures exceeding 70,000 psi.
Supervised and maintain shipboard equipment maintenance system Supervised up to 6 junior welders.
Experience
10+ Years
Level
Senior
Education
Bachelor's
Hull Technician Resume
Objective : Diligent, Self-motivated professional with a track record of success as a Hull Technician. Goes above and beyond expectations to ensure quality repair and maintenance of equipment. Exhibits superior communication skills while collaborating with all organizational levels. Thrives within fast-paced and pressure-filled environments.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.