Instrumentation and Control Engineer Resume Samples

Description :

1. Designed electrical circuits and panels for PLC, DCS, and other control applications.
2. Developed functional descriptions for the programming of control systems.
3. Estimated the engineering effort and total installed cost for controls and instrumentation for new facilities as well as changes to existing facilities.
4. Provided process control and instrumentation input to P&IDs.
5. Managed scope, schedule, and budget for smaller projects or a portion of a larger project.
6. Supervised other engineers and designers (local, remote, and out of the country) to achieve project results.
7. Coordinated with project managers and other disciplines to support the needs of the entire project.

Experience

10+ Years

Level

Senior

Education

Bachelor's degree in Electrical Engineering

Description :

1. Developed detailed design documents, specifications, and drawings for instrumentation and control systems, including sensors, transmitters, controllers, and actuators.
2. Specified wiring layouts, cable schedules, and routing plans for power and signal distribution within instrumentation and control systems.
3. Designed electrical wiring layouts for instrumentation and control panels, ensuring compliance with electrical codes, safety standards, and client specifications.
4. Specified appropriate wiring components, including cables, connectors, terminals, and conduit, based on system requirements and environmental conditions.
5. Coordinated with electrical to ensure accurate installation of wiring systems, providing guidance on routing, termination, and labeling.
6. Collaborated with mechanical and process engineers to integrate instrumentation and control systems into overall facility designs.
7. Utilized industry-standard software tools such, as AutoCAD and SCADA systems, to develop and simulate control system designs.

Experience

7-10 Years

Level

Management

Education

Bachelor's degree in Electrical Engineering

Description :

1. Anticipated future NTM engineering needs and the modifications required to accomplish a technical goal.
2. Addressed complex and difficult technical issues requiring novel and highly creative approaches to ensure accuracy, completeness, and timeliness of work.
3. Assumed technical and engineering responsibility of the success of an identifiable project.
4. Provided focal point for technical communication within the assigned project and may represent the Company as the prime technical contact to customers and/or government regulatory agencies.
5. Assisted on providing engineering estimates to support the proposals for projects and services.
6. Managed deliverables and report to project management about progress.
7. Presented reports at engineering meetings, participates in program reviews and consults on instrumentation and control issues.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Electrical Engineering

Description :

1. Monitored process variables, equipment performance, and production metrics using real-time data from control systems, analyzing trends, deviations, and anomalies.
2. Developed technical documentation, including system specifications, wiring diagrams, control logic diagrams, and user manuals, to document system design, configuration, and operation.
3. Ensured compliance with industry standards, regulatory requirements, safety protocols, and quality standards in control system design, installation, and operation.
4. Provided training and guidance to operations teams, maintenance personnel, and end-users on control system operation, troubleshooting procedures, and best practices.
5. Collaborated with cross-functional teams, including engineers, technicians, project managers, and stakeholders, to share knowledge, exchange ideas, and drive continuous improvement initiatives.
6. Managed control system projects from concept to completion, including project planning, scheduling, budgeting, and resource allocation.
7. Collaborated with internal teams, external vendors, contractors, and suppliers to coordinate project activities, ensure deliverables meet quality standards, and achieve project milestones.

Experience

2-5 Years

Level

Executive

Education

Bachelor's degree in Electrical Engineering

Description :

1. Responsible for designing and implementing control systems for industrial processes, including PLC programming, HMI development, and SCADA configuration.
2. Responsible for conducting instrumentation design, selection, and installation for measurement devices, sensors, and control valves, ensuring accuracy and reliability.
3. Responsible for collaborating with cross-functional teams, including engineers, technicians, and project managers, to plan, execute, and commission control system projects.
4. Responsible for conducting system integration, testing, and validation of control systems, ensuring functionality, performance, and compliance with project requirements.
5. Responsible for developing and maintaining technical documentation, drawings, schematics, and user manuals for control systems and instrumentation setups.
6. Responsible for providing technical support, troubleshooting, and training to operations teams, maintenance personnel, and end-users to optimize system performance and uptime.
7. Responsible for implementing continuous improvement initiatives, such as process optimization, automation enhancements, and reliability improvements, to increase efficiency and reduce costs.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Electrical Engineering

Description :

1. Implemented control system projects, including hardware installation, wiring, network configuration, and software programming, ensuring compatibility, functionality, and reliability.
2. Developed PLC programs, HMI screens, and SCADA displays to visualize process data, monitor equipment status, and facilitate operator control and monitoring.
3. Integrated control systems with existing infrastructure, equipment, and automation devices to ensure seamless operation, communication, and data exchange.
4. Conducted system testing, simulation, and validation to verify system functionality, performance, and compliance with design specifications and project requirements.
5. Provided technical support, troubleshooting, and maintenance for control systems, instrumentation devices, and automation equipment to identify and resolve issues promptly.
6. Performed periodic system inspections, calibration checks, and preventive maintenance tasks to ensure system reliability, accuracy, and uptime.
7. Optimized control strategies, algorithms, and setpoints to improve process efficiency, productivity, and quality while minimizing energy consumption and waste.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Electrical Engineering

Description :

1. Experienced in configuring, programming, and maintaining SCADA systems for real-time data acquisition, process monitoring, alarm management, and operator control.
2. Selected, installed, and calibrated instrumentation devices, sensors, transmitters, control valves, actuators, and other measurement devices used in industrial processes.
3. Optimized control strategies, PID (Proportional-Integral-Derivative) tuning, loop control, and control algorithms to improve process efficiency, performance, and reliability.
4. Troubleshooted control system issues, diagnosing faults, performing root cause analysis, and implementing corrective actions to ensure system reliability and uptime.
5. Experienced in analyzing process data, trends, and performance metrics using data analysis tools, statistical methods, and visualization techniques to identify opportunities for process improvement and optimization.
6. Skilled in project planning, coordination, execution, and resource management to successfully manage control system projects from concept to completion, ensuring adherence to project timelines, budgets, and quality standards.
7. Interacted effectively with cross-functional teams, stakeholders, vendors, contractors, and clients, conveying technical concepts, providing training, and fostering collaborative relationships.

Experience

7-10 Years

Level

Management

Education

Bachelor's degree in Electrical Engineering

Description :

1. Coordinated with all disciplines involved, including outside consultants.
2. Reviewed and approved documentation developed by contractors.
3. Prepared Instrumentation and Controls deliverables for different design phases based on P&ID’s, specifications, standards, codes, and customer input, including instrument lists, I/O lists, instrument data sheets, wiring and segment diagrams, instrument and device location diagrams.
4. Worked directly with lead engineers to develop technical strategy and deliverables for Biotech, Pharmaceutical, and/or Advanced Technology client projects.
5. Developed understanding of instrumentation and controls as it applies to sanitary process system design.
6. Coordinated and interacted effectively with project managers, vendors, and engineers across multiple disciplines.
7. Reviewed supplier and designed documentation to verify the accuracy and completeness of vendor submittals and shop drawings.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Electrical Engineering

Description :

1. Provided instrumentation and control system engineering and design for water and wastewater projects including specifications, drawings, and cost estimates.
2. Developed design documentation for control systems including loops sheets, control single lines, and network drawings for SCADA, PLC, and DCS Systems
3. Coordinated with process engineers and develop Process and Instrumentation Diagrams (P&IDs).
4. Effectively and successfully completed projects.
5. Recruited, Technical training, development and management of instrumentation and controls staff.
6. Established and improved standards, practices, guidelines, for instrumentation and controls engineering.
7. Provided 'on-the-spot' advice and decisions - technical and cost estimates.

Experience

2-5 Years

Level

Executive

Education

Bachelor's degree in Electrical Engineering

Description :

1. Ensured coordination, between the electrical and systems and process control teams and other disciplines, of all activities being performed as designs evolve.
2. Prepared and reviewed of all engineering documentation within discipline including, but not limited to, the following documents, lists, calculations and detail drawings, Instrumentation and Controls Design Criteria, Control Philosophy and conceptual design of ,industrial control systems, Control Narratives, instrument index, I/O lists, instrumentation calculations, data sheets, specifications, selection and sizing, P&ID’s, system architecture drawings, instrument location drawings, installation detail drawings, wiring and interconnection diagrams, ISA loop drawings, motor control schematics.
3. Oversaw production of scope of work documentation, engineering and construction work packages and performing quality checks and verification of compliance to all relevant standards and internal procedures, Checking and verifying construction drawings, vendor drawings, material requisitions and approval of bid tabulations and field checkout, Construction support, commissioning, and start-up assistance.
4. Expertised in instrumentation and control engineering standards, including NACE, IEC, PIP, ISO, NFPA, and API.
5. Conducted instrument troubleshooting during commissioning and checkout processes, performed all design reviews for team consideration in regular meetings.
6. Performed regular testing and evaluation of instrumentation designs. 
7. Provided direction to design and technical staff and may lead a team of professional staff in developing innovative and practical solutions.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Electrical Engineering