Instrumentation Technician Resume Samples

Description :

1. Assist with isolations and permits as per the responsibilities of a Performing Authority Assist with the installation of control.
2. Provides electronic knowledge and approval for the implementation of improvements, changes, and maintenance of process control and instrumentation systems.
3. Ensures accuracy of instruments using standard weights and measures, pneumatic and electronic test equipment and small hand tools.
4. Ensures efficient operation of instruments and systems by resolving detected faults using pneumatic and electronic testing devices and precision measuring instruments.
5. Ensuring all permits to work are in order, and have daily toolbox talks to raise awareness of all possible safety concerns.
6. Ensuring all instruments, fire detection/suppression systems, and electrical installations are performed as per specification, standards and drawings.
7. Assist for all aspects of commissioning the field devices: transmitters, sensors, detectors, control valves, shutdown valves, etc.
8. Ensures efficient operation of instruments and systems by resolving detected faults using pneumatic.

Experience

7-10 Years

Level

Management

Education

Computer Science

Description :

1. Ensured customer satisfaction in products sold.Provided technical support via phone, email, in person, and on-site.
2. Demonstrated ability to effectively learn and support new products with little prior knowledge or training.
3. Performed calibration and verification of test and measurement equipment including analog and digital panel meters, multimeters.
4. Designed, constructed and documented panels and control systems based on customer applications.
5. Performed modification and customization of instrumentation to conform to customer requirements.
6. Assisted sales staff with an interpretation of specifications and capabilities of products sold by Branom Instrument Co.
7. Lead a team of technicians on large shipboard calibration contracts Implemented service of new product lines adding new customers and support opportunities.

Experience

10+ Years

Level

Senior

Education

Electronics Engineering

Description :

1. Maintain, calibrate, configure, monitor, test, troubleshoot, install, and repair instrumentation, process controls, data acquisition systems, and electrical systems 
2. Set up, modify Network camera systems on test vehicles'.Poe, Ip pan tilt zoom (ptz) network camera troubleshooting.
3. Analyze results of calibrations and processed data and assist in the interpretation of test data.
4. Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
5. Adjust, repair or replace faulty components of test setups and equipment Complete necessary instrumentation of test stands, wiring, and data acquisition systems.
6. Perform layout and wiring of electrical panels. Layout, build, test, troubleshoot, repair and modify developmental.
7. Read and interpret planning documents, schematics, wiring diagrams, specifications, drawings, manuals, blueprints, and engineering sketches

Experience

7-10 Years

Level

Management

Education

Medical Assistant

Description :

1. General Responsible for maintaining and upgrading instrumentation on the town's water plant, water distribution system, and sewer lift stations.
2. Perform daily tasks within the plant such as inspections on electrical motors and pumps, water sampling, backwash unit maintenance.
3. Maintain a network of underground pipeline for city water and wastewater systems.
4. Perform repair, maintenance, and upgrades on the underground pipeline.
5. Responsible for measurement of bulk water, using ultrasonic flow meters, produced from wells into the elevated tank and flow from elevated tank into the distribution system.
6. Instrumentation Experience with analytical instrumentation of online chlorine and pH monitors, dissolved oxygen transmitters.
7. Responsible for maintenance and upgrade of instruments throughout the system.
8. Responsible for operation, maintenance, programming, and response to call out of plant SCADA system.

Experience

5-7 Years

Level

Executive

Education

Industrial Instrumentation

Description :

1. Disassembled, inspected, cleaned repaired, calibrated, tested, and performed periodic maintenance of standard equipment, systems, and controls.
2. Operated such electronic test equipment as multi-meters, frequency generators and counters, galvanometers, digital logic probes and oscilloscopes.
3. Inspected, evaluates and determines necessary modification, performs simple repairs or removal of instruments or devices needing overhaul during scheduled maintenance.
4. Recorded and reports abnormal function of equipment or out of tolerance conditions and initiates corrective action.
5. Reinstalling, tests evaluate, calibrate and marinating instruments and devices upon completion of repairs.
6. Communicated with customer staff and outside contractors in the calibration, repair, and operation of equipment as necessary.
7. Installed and upgrade equipment software/firmware, and modular parts.Complied with company policies and procedures and adheres to company standards.

Experience

2-5 Years

Level

Executive

Education

Business Administration

Description :

1. Perform required calibrations on instrumentation and equipment per schedule and SOPs.
2. Assembly, installation, adjustment, testing, cleaning, calibration, maintenance, repair and troubleshooting of plant instrumentation.
3. Provide troubleshooting, diagnostic assessment and other technical support on instrumentation.
4. Perform calibrations on various devices measuring flow, pressure, temperature, levels, oxygen, and hydrogen peroxide levels, torque and viscosity.
5. Tested and calibrated various pipettes low to high volume testing weight and evaporation.
6. Investigate and communicate quality-related issues including instrument discrepancies, exception reporting, and other non-compliance related issues.
7. Performed and documented in accordance with existing company policies, procedures, Current manufacturing practices, FDA and OSHA requirements.

Experience

7-10 Years

Level

Management

Education

Business Management

Description :

1. Read schematics, work orders, diagrams, and wire lists to determine materials needed and sequence of assembly.
2. Selected wires of the specified color, marking, or length and looped wires between guide pegs on harness board following color-coded lines or sequential numbers on board or diagram.
3. Attached ends of wires to components, plugs, or terminal strips, using soldering iron or crimping device.
4. Inserted cables in plastic tubing or injected plastic sealant around terminals to protect cables from dust and moisture.
5. Routing wire harnesses to prototype Ford Vehicles Soldering, crimping, tube bending, component layout & packaging on vehicles or subsystems.
6. Proper installation of thermocouples & pressure transducers routed in Vehicles.
7. Experienced with Allen Bradley Power Flex Variable Frequency Drives.

Experience

5-7 Years

Level

Executive

Education

Diploma

Description :

1. Fabricate, install, maintain, and troubleshoot instrumentation transducers, wiring, and data recording equipment.
2. Training and hands-on experience of specialized Virginia patch panel iCon connectors, thermal couplers, transducers, MS Connectors.
3. Read blue prints and fabricate instrumentation wire harnesses according to engineering specifications and G.E./ Boeing wiring practice standards.
4. Document a description of troubleshooting and work completed/ performed at the end of each day to ensure a proper and thorough pass down and turnover.
5. Sign and document for tools, items, and aircraft equipment, removed and/ or assembled.
6. Perform complex diagnostics to analyze problems associated with instrumentation and control using test equipment such as electronic meters.
   
7. Work with Valero technicians during a unit outage to repair or replace any damaged instrumentation equipment.

Experience

2-5 Years

Level

Executive

Education

Diploma In General

Description :

1. Maintain, calibrate, configure, monitor, test, troubleshoot, install, and repair instrumentation, process controls, data acquisition systems, and electrical systems.
2. Investigate, diagnose, correct and document instrumentation or system malfunctions.
3. Fabricate and install parts and systems to be tested in test equipment, using hand tools, power tools, and test instruments.
4. Adjust, repair or replace faulty components of test setups and equipment.
5. Complete necessary instrumentation of test stands, wiring, and data acquisition systems.
6. Responsible to the Department of Environmental Quality during site visit Built Excel Spreadsheets.
7. Maintained Company Vehicle, Computer, Operators License, and expense account.

Experience

5-7 Years

Level

Executive

Education

Engineering Technology

Description :

1. Perform control strategy checks, trending, using DCS and HART Communicator to check instrument configurations and to calibrate instruments.
2. Perform calibrations on HART protocol transmitters and valve positioners.
3. Perform vibration analysis applying set points, checking configurations and alarms.
4. Responsible for unit start-ups/shutdowns on compressors, turbines, stripper/absorber towers, furnaces, boilers, natural gas bleachers.
5. Coordinate with maintenance and operations on work orders to be completed.Hot work permitting and lock-out/tag-out procedures.
6. Developed or revised calibration procedures for Inspection, Measuring & Test Equipment.
7. Performed water analysis and collect samples for preparation, labeling, and shipment to Woodland's laboratory.

Experience

10+ Years

Level

Senior

Education

Business Management

Description :

1. Install and calibrate instrumentation at various customer sites.
2. Work on building and rewiring control panels, installing camera systems, and door access systems.
3. Provide customer assistance on troubleshooting various equipment and controls.
4. Prepare and conduct onsite training for instrumentation and process controls.
5. Perform service on a wide range of process equipment which includes repair/calibration and diagnostic evaluations.
6. Train customers, third-party vendors, engineers on products, software, and other services related information.
7. Prepare instruments for demonstrations and presentations. Help in the startup and implementation of SCADA and telemetry systems.

Experience

2-5 Years

Level

Junior

Education

Mechanical Engineering

Description :

1. Construction and installation of pneumatic control panels.Calibration and testing of level and pressure devices and transmitters.
2. Calibration and downloads of gas flow computers. Specializing in pressure safety valves; both conventional and pilot-operated.
3. Performed the annual PSV inspections at California offshore facilities for government safety compliance; involving in-line testing and function testing on a volume test bench.
4. Work closely with government safety officials who witness PSV testing during the annual safety inspection.
5. Performing commissioning, startup, and daily operations.Performed Calibrations in cleanroom environments.
6. Documented and tracked calibrations using asset management software. Performed Calibrations in cleanroom environments.
7. Tested and verified the correct operation of instrumentation and control systems during functional acceptance testing.

Experience

7-10 Years

Level

Management

Education

Automotive Engineering