Mechanic Technician Resume Samples

Description :

1. Received orders at the morning meeting once at hoist with a vehicle on it would go threw the build book confirm and verify then sing off all that is completed.
2. Helped produce, build and test a better vehicle for the customer.
3. Started working for Roush in the builds department for about a half year.
4. Built new model prototype vehicles from the ground up.
5. Started with a bare chassis safely straped and secured to the hoist arms.
6. Followed the build books by installing all wireing, cross members fuel lines, axles etc.
7. Installed all parts to motor completing and installing complete powertrain onto mounts to chassis.

Experience

0-2 Years

Level

Entry Level

Education

Certification

Description :

1. Performs entry level mechanical skills necessary for mechanical maintenance, trouble shooting and repair actions (including hydraulics, pneumatics, suspension, steering, brakes, doors, modules, etc.).
2. Repairs P/RT guideway structures, stations, buildings, fences, and supporting equipment.
3. Performs scheduled maintenance actions and general maintenance type repairs (including: steel, masonry, painting, cleaning, etc.).
4. Learns to perform a variety of miscellaneous support activities necessary to support the overall maintenance mission including: Operates a four-wheel drive vehicle with standard transmission with valid driver's license.
5. Operates special purpose motor equipment within the maintenance facility and on the guideway structure.
6. Implements emergency response plans and actions for unplanned or emergency events.
7. Routinely communicates with other PRT employees via hand-held UHF radio to provide vital information.

Experience

10+ Years

Level

Senior

Education

Bachelor's

Description :

1. Assembles valve chamber, torque assembly screws to specific torque.
2. Installs cat bed heater lead wire bracket & sensors.
3. Attaches cat bed heater to bracket using clamps.
4. Installs electrical connectors & tubing cat bed heater R1 elements.
5. Removes thermo couple & perform valve coil resistance test.
6. Performs catalyst bed heater resistance test, primary element & redundant.
7. Performs catalyst bed temperature sensor resistant test.
8. Performs valve coil insulation resistance test, H.E.D. Sonic cleaner, Vic leak detection, lock wire.

Experience

2-5 Years

Level

Junior

Education

Diploma

Description :

1. Makes line assignments, distributes changeover schedule and makes overall assignments to the mechanics.
2. Supports the Manufacturing Engineer in maintaining/improving the unit's equipment and procedures.
3. Acts as instructor and consultant for other mechanics on technical matters, line problems and new start-ups.
4. Monitors spare parts, initiates work orders, and makes recommendations concerning machine repair and modification for supervisory approval.
5. Handles complaints and suggestions of Packaging associates and supervisors and takes appropriate action.
6. In the absence of a mechanic, assumes the responsibility for running any line within his section.
7. Handles all repair and overhaul of the Packaging equipment with assistance from the Manufacturing Engineer and the Maintenance Department when needed.
8. Repairs change parts and/or makes the necessary change parts to ensure efficient changeover and start up of all new and existing product items.
9. Oversees the proper application and execution of the preventive maintenance program.

Experience

2-5 Years

Level

Junior

Education

Electronics

Description :

1. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
2. Recorded the respective measurements for each project.
3. Worked extended hours on weekday and weekend projects.
4. Received and correctly processed both written and verbal instructions, prints and work orders.
5. Obtained appropriate tooling and fixtures.
6. Made and revised set ups on test strands previously calibrated by other staff.
7. Disassembled, reassembled and corrected changeover.
8. Maintained counts and lifts, shifts and stocks materials and parts.

Experience

5-7 Years

Level

Executive

Education

Bachelor's

Description :

1. Performed maintenance on all vehicles that come into shop.
2. Identified problems with customer vehicles and up-selling items.
3. Repaired lights and wiring Repairing/replacing tires of all sizes Spot welding/use of tourches Computer diagnostics Performing Safety Recalls Performing preventative maintenance such as Tune-ups, oil changes, tranission flushes, 4x4 service and hydrolic service.
4. Worked efficiently and assuring customer satisfaction are the two primary keys to success here, along with positive attitudes and a great work ethic.
5. Changed, repaired, diagnosed engine performance, installed any brake linings, checked brake fluid.
6. Repaired, replaced, cleaned and maintained the pit-stop practice for crew.
7. Performed related duties and responsibilities as assigned by supervisor.

Experience

7-10 Years

Level

Management

Education

Diploma

Description :

1. Performed professional fabrication and installation of after market lift modification equipment on vehicles and performed full range of repair work on automotive equipment.
2. Troubleshooted, repaired, removed and replaced major systems such as engines, Transmissions, trans axels, electronic fuel injection systems, emission control systems, differentials, transfer cases, electrical systems, drive lines and hydraulic systems.
3. Replaced and performed brake adjustments on vehicles.
4. Used a variety of test equipment and tools such as wrenches, torque wrenches, pneumatic tools, sockets, brake tools , engine analyzers, multi-meters, temperature gages, hydrometers, and pressure gages.
5. Repaired and replace damaged body parts such as hoods, frames, cross members, windows, windshields, doors and vehicle bodies.
6. Read and interpret parts list, technical manuals, diagrams and electrical schematics.
7. Looked up replacement parts in parts manuals.

Experience

2-5 Years

Level

Junior

Education

Bachelor's

Description :

1. Repairs the fleet of buses in the division.
2. Diagnoses and repairs busses as need.
3. Responsible for Air conditioning, Diagnosing, check engine lights and brake and front end.
4. Executes the highest level automotive diagnostics and repairs.
5. Performs a wide range of automotive repairs on all makes and models.
6. Stays current on new vehicle technologies and diagnostic methods.
7. Communicates cause and correction for customer concerns regarding their vehicle.
8. Assists other technicians with difficult diagnostics and repairs.
9. Maintains high quality control standards in personal workmanship as well as the shop.

Experience

5-7 Years

Level

Executive

Education

Certification

Description :

1. Supervised and worked along 10 other technicians Ordered necessary parts for 20 boats Ensured technicians were working in a safe manor.
2. Ensured technicians had all necessary tools and equipment to work effectively.
3. Conduct annual and semi- annual preventive maintenance within a yearly schedule.
4. Set a maintenance schedule for all outboard motors.
5. Ensured that boat operators had at 2 or 3 functioning boats for each mission.
6. Ensured boats and outboard engines are repaired within set schedule.
7. Completed full, accurate, and honest courtesy inspections in service to our customers.

Experience

10+ Years

Level

Senior

Education

Bachelor's

Description :

1. Managed service department including outside service technicians, dispatched 9 service technicians.
2. Responsible for Sales of tires and mechanical services.
3. Responsible for ordering parts, stock orders and maintaining sales records.
4. Created and maintained 27 new business accounts including accounts for heavy construction, large and small fleet, and landscaping companies.
5. Promoted from Lead Mechanic/Shop Foreman.
6. Supervised mechanical staff and performed daily tasks including, writing work orders, answering phones and greeeting customers.
7. Performed general mechanical duties which included brakes, oil changes, front end and suspension, electrical/wiring, engine diagnostics, engine overhaul, and transmission servicing and repair including clutches.

Experience

5-7 Years

Level

Executive

Education

High School