A Microwave Engineer is an electronics engineer who takes responsibility for designing, manufacturing, testing, and installing the electronic components and systems that are used to transmit and receive microwave and short radio waves and signals. While the job duties tend to vary from one setting to the other, the following are certain core duties listed on the Microwave Engineer Resume – designing integrated circuits and other electronic components that are used in microwave devices, laying out potential circuits or component designs for the product, testing the model and evaluating the performance against predetermined standards, ensuring the design meets standards for microwave performance set by the FCC and preparing and submitting licensing documents and other paperwork.
Most of these engineers have an extensive background in electronics engineering. Some employers are satisfied with a degree in electronics engineering, while many expect a Master’s degree. Strong knowledge of microwave equipment and support systems is mandatory. Experience working with and designing integrated circuits and other electronic components is highly appreciated. As the job revolves around testing and evaluation, the engineer is expected to possess strong problem-solving skills and communication skills.
Headline : Microwave Engineer experienced in antenna design, simulation, fabrication, implementation and measurement. Industrial experience in designing and bringing to production antennas, filters, matching networks, couplers, waveguides, phase-shifters and RF switches. Hands-on experience in measurement tools.
Designed low-loss and low-dispersive waveguides for mm-wave and THz frequency bands (90 - 220 GHz) Design of bandpass filters and antennas based on the proposed waveguide technology Develop a microfabrication process for the realization of the waveguides, antennas, and filters Measurement of the fabricated components using VNA THz extension heads Antenna and RF/Microwave Engineer, Taken Telecommunication Sep.
Simulated/modeled RF front-end systems, working with system architects, modem/DSP, and ASIC engineers to partition functions between hardware and software domains.
Derived RF HW specifications for the RF system and RF blocks.
Developed RF/microwave circuits, components, MMICs, board,s and packages.
Evaluated and characterized prototypes and RF components.
Characterized and analyzed full radio performance.
Assisted in the development of automated test equipment for lab measurements.
Experience
5-7 Years
Level
Executive
Education
GED
Microwave Engineer Resume
Summary : Microwave Engineer with 13 years experience in GSM 2G, 3G, LTE, microwave system, and telecom transmission. Looking for a challenging position in telecom engineering, information technology, or the data communication field. Seeking a challenging position in an area relevant to my academic background a professional experience where I can add value to my employer widen the scope of my experience in the GSM and communication field.
Skills : Excellent Communicator, Quick Technical Understanding, Great Problem Sovler.
Description :
Supervised COW (Cell On Wheels) installation of microwave radio, GSM antenna, and integration.
Designed and perform electrical, thermal, and lifetime tests (e.g. VNA and TDR measurements) for flexible wiring technologies.
Quantified and improved performance and yield metrics to implement assembly improvements.
Developed, designed, and simulated wiring solutions to better understand performance and yield metrics at all stages of development (i.e., research and development, production, etc.).
Communicated with other team members and organize data and design techniques for all stages of development.
Designed and documented mechanical parts and assemblies used for microelectronic systems.
Supported thermal, structural, and vibration analysis of products.
Experience
10+ Years
Level
Senior
Education
GED
Microwave Engineer Resume
Summary : Microwave Engineer using Pathloss 5 and Google Earth. are done initially on all but very short paths. Microwave path and site locations and height measurements using survey equipment provides accurate data for Pathloss 5 inputs to calculate clearances along the path for FCC licensing.
Skills : Microsoft Office, CISCO, Autocad.
Description :
Responsible for project management of microwave network capacity augments for the North Carolina and Atlanta markets.
Capacity planning to the network.
Design new links to new sites.
Preform Microwave design for links that are at or near capacity.
Work with the National Backhaul team to develop national standards for other teams.
Responsible for planning and directing Line-of-Sight surveys and adjusting network designs daily based on LOS feedback.
Responsible for creating MOPs for the field team to perform work.
Experience
10+ Years
Level
Senior
Education
BS In Electrical Engineering
Microwave Engineer Resume
Headline : Experienced Microwave Engineer with expertise in path design, path troubleshooting, path surveys, sweep testing, and unlicensed radios. Strengths include good troubleshooting skills and a broad knowledge of the telecommunications industry, from site acquisition to site design and construction. Significant accomplishments include: Designed two low latency routes that were less than 1% greater than the straight line distance.
Designed microwave networks using Pathloss, Iceman, Google Earth, and path surveys.
Worked with RF Engineering, Network Deployment, and Construction Management teams to design a strong microwave network that maximizes performance and provides redundancy/diversity while meeting budgetary objectives.
Performed rooftop path surveys and manage vendors providing tower and boom truck path surveys.
Worked with Comsearch to coordinate frequencies and license paths.
Reviewed and approved closeout packages.
Maintained the entire microwave network database.
Worked closely with Operations to maintain and troubleshoot the network.
Experience
5-7 Years
Level
Executive
Education
Bachelors
Microwave Engineer Resume
Objective : Microwave Engineer with broad experience in the satellite, aerospace, radar, defense, wireless and commercial industries. Skills include design, development, computer modeling, fabrication, manufacturing, test, and quality assurance. More than twenty-five years of configuration, calibration and operation of Antenna Test Facilities.
Developed miniature broadband dipole arrays for airborne direction finding systems.
Involved in field test of aircraft antennas on full-scale mockups.
Conducted experiments with Time Domain Gating applied to antenna phase measurement.
Wrote HP-IB test software and device drivers for antenna data collection.
Designed and developed prime reflector antennas and low-noise microwave surveillance systems.
Calibrated and operated an outdoor antenna test range.
Developed MOP standards for other markets to follow.
Experience
2-5 Years
Level
Junior
Education
GED
Microwave Engineer Resume
Summary : Microwave Engineer with 13 years experience in GSM 2G, 3G, LTE, microwave system and telecom transmission. Looking for a challenging position in telecom engineering, information technology or the data communication field. Seeking a challenging position in an area relevant to my academic background & professional experience where I can add a value to my employer widen the scope of my experience in GSM and communication field.
Skills : Excellent Communicator, Quick Technical Understanding, Great Problem Sovler.
Description :
Supported technicians and Saudi nationals in restoring major faults to prevent long outages.
Updated system parameters through software reconfiguration.
Responded swiftly in any call-out that requires immediate restoration of the site to prevent long outages, especially during high traffic hours.
Troubleshoot, tested, and configured parameters to verify and diagnose faulty equipment through a software application.
Isolated and identified faults efficiently and effectively.
Tested GSM signal strength and quality using TEMS application.
Provided mechanical engineering support to manufacturing.
Experience
7-10 Years
Level
Management
Education
GED
Microwave Engineer Resume
Summary : Highly motivated Microwave Engineer professional with 14 years of progressive engineering and project management experience taking on challenging assignments in a team-oriented environment. Track record of accomplishments includes BH Network Design, Systems engineering, Testing, and Implementation of voice and data networks.
Skills : Planning Skills, Time Management.
Description :
Maintained Microwave Systems in Kansas, Missouri.
Optimized the front end to obtain the best NF.
Tested the waveguides and troubleshoot the issues that occurred with the lnas.
Worked effectively with multiple teams, including network deployment vendors, market project managers, RF team, National BH, sales and marketing, construction, and commissioning teams to build an optimal network.
Developed microwave design with licensed frequencies (11, 18, 23, 80 GHz) and unlicensed frequencies (5.8 GHz) using planning tool Pathloss for the backhaul network.
Worked with manufacturing engineers on production testing of RF avionics components and systems.
Performed emergency repairs as needed.
Experience
10+ Years
Level
Senior
Education
B. E In Communications Engineering
Microwave Engineer Resume
Objective : Conducting safety-related training on the job site or in classrooms. Enforcing company safety regulations perform safety audits and reviews. Writing or corrected technical manuals, engineering drawings, or specification books. Able to meet deadlines and come in on/under budget. Maintaining databases, assemble PowerPoint presentations, and do research on the internet. Providing technical support to company employees and customers on a daily basis.
Skills : Managing Skills, Planning Skills.
Description :
Coordinated with Huawei site Supervisors, Sub-Cons, and Customers.
Designed Traffic sheets and worked for Media (Microwave Transmission, Leased Lines) related issues and testing.
Worked on Optical Switching Network (OSN1500, OSN3500) and its Troubleshooting.
Planned for monthly Roll-out sites and followed their Implementation.
Planned for targets of all Swap site Activities and provided end-to-end Media for sites and their Requirements.
Performed system tests on Fiber Optic Systems in Oklahoma and Arkansas.
Audited Fiber Switches across the U.S.
Experience
2-5 Years
Level
Junior
Education
BS In Technology
Microwave Engineer Resume
Summary : Responsible for designing and developing new techniques and methodologies for control and integration of diverse energy resources and points of consumption.
Installed and tested Motorola cellular equipment in Indiana.
Tuned and built the TEC lnas at different frequencies such as L, S, and Ka bands.
Researched, developed, designed, and tested electrical/electronic systems, components, equipment, and networks as well as their control and optimization theory and techniques.
Adapted and applied control theory to design electrical/electronic systems with desired behaviors.
Designed, developed, installed, and supervised all aspects of control systems and processes.
Determined design approaches and parameters.
Analyzed equipment to establish operating data, conducts experimental tests and evaluates results.
Selected components and equipment based on analysis of specifications and reliability.
Experience
7-10 Years
Level
Management
Education
Master's In RF And Microwave
Microwave Engineer Resume
Headline : An aspiring Microwave Engineer committed to professionalism; highly organized, works under strict deadline schedules with attention to detail, and has excellent analytical skills.
Skills : Microwave, Developing Skills.
Description :
Researched, developed, and applied tools, simulations, and models of electric power systems and components addressing problems in planning, operations, economics, resilience, and optimization of system performance.
Developed and applied system architectures, models, and technologies for secure and reliable electric power systems and related technologies such as communications systems and grid cybersecurity.
Designed, simulated, and tested RF front-end systems and sub-systems.
Derived specifications for RF/microwave systems and sub-systems.
Developed RF/microwave circuits and components including transceivers and antennas.
Characterized RF system performance.
Participated in technical design reviews and element/system-level activities.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
