Pipe Fitter Resume Samples

Description :

1. Safety oriented; able to follow written and verbal safety guidelines.
2. Lay out, assemble and fabrication pipe systems that carry gases and liquids.
3. Review blueprints prior to installing pipe supports to blue print specification.
4. Able to cut pipes to appropriate lengths based on the plans and join them by various methods.
5. Maintain pipe systems and related hydraulic and pneumatic equipment for industrial systems, such as heating, cooling, lubrication, interior sprinkler systems.
6. Ability to efficiently use various power and hand tools.
7. Able to communicate efficiently and fluently in both written and oral form.

Experience

0-2 Years

Level

Entry Level

Education

High School Diploma

Description :

1. Plan pipe system layout, installation, or repair, according to specifications.
2. Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
3. Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
4. Measure and mark pipes for cutting or threading.
5. Attach pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
6. Assemble or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
7. Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
8. Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools.

Experience

2-5 Years

Level

Executive

Education

Graphic Arts And Fabrication

Description :

1. Read blue prints and used tape measurer to take accurate measurements.
2. Used torch, chop saws, band saws, sawzoll, etc.
3. Laid out materials, installed spools and verified proper fit per drawings using levels and squares.
4. Attended daily safety meetings to receive JSAs.
5. Worked in conjunction with management to resolve practicalities with blue prints.
6. Wore PPE and followed all safety protocols per OSHA.
7. Discussed safety procedures with appropriate state and federal regulatory agencies.

Experience

2-5 Years

Level

Junior

Education

Diploma

Description :

1. Planned pipe system layout, installation, or repair, according to specifications.
2. Inspected, examined, or tested installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
3. Selected pipe sizes, types, or related materials, such as supports, hangers, or hydraulic cylinders, according to specifications.
4. Measured and marked pipes for cutting or threading.
5. Attached pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
6. Assembled or secured pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
7. Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
8. Turned valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.

Experience

2-5 Years

Level

Junior

Education

Diploma

Description :

1. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
2. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
3. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
4. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
5. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
6. Detect faulty operation of equipment or defective materials and notify supervisors.
7. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
8. Develop templates and models for welding projects, using mathematical calculations based on blueprint information.

Experience

7-10 Years

Level

Management

Education

Bachelor Of Science

Description :

1. Performed pipe fabrication, installation and fitting according to proper specifications.
2. Identified and located required tools prior to starting each project.
3. Inspected pipes and piping systems to assess their quality and condition.
4. Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
5. Cut and beveled piping using cutting torches, saws and threading machines.
6. Maintained tools and equipment to keep them in excellent working condition.
7. Operated equipment such as cutting torches, threading machines, grinder, beveling machines and round-up clamps.
8. Cut openings in walls and floors to accommodate pipe and pipe fittings.

Experience

5-7 Years

Level

Consultant

Education

High School Diploma

Description :

1. Plan pipe system layout, installation, or repair, according to specifications.
2. Inspect, examine, or test installed systems or pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
3. Select pipe sizes, types, or related materials, such as supports, hangers, according to specifications.
4. Measure and mark pipes for cutting or threading.
5. Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
6. Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
7. Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.

Experience

5-7 Years

Level

Management

Education

Bachelor Of Science

Description :

1. Trained new employees on company customer service policies and service level standards.
2. Performed pipe fabrication, installation and fitting according to proper specifications.
3. Inspected pipes and piping systems to assess their quality and condition.
4. Installed and repaired gas lines and hot and cold water lines.
5. Worked on all aspects of fire suppression systems from start to finish.
6. Followed relevant codes, regulations and safety techniques.
7. Created and submitted daily reports on the progress of all plumbing projects.
8. Identified and located required tools prior to starting each project.

Experience

7-10 Years

Level

Management

Education

High School Diploma

Description :

1. Read blueprints and specifications to determine the scope of work: locations, quantities, and sizes of materials required.
2. Utilized a multitude of tools required for tasks.
3. Identified safety risks and the precautions required to eliminate those risks.
4. Prepared, welded, fabricated, installed, and fit pipe to specifications needed to complete the job.
5. Installed valves, hangars, supports, flanges inside piping system according to plans and applicable specifications.
6. Performed tests to ensure the quality of the pipe and the piping systems.
7. Hoisted loads using slings, chains, shackles, hooks, cables, and other rigging equipment.

Experience

2-5 Years

Level

Executive

Education

Computer Information Systems

Description :

1. worked as pipe fitter and crew lead man on expansion of LNG facility.
2. Installed valves, hangers, supports and flanges inside piping systems.
3. Assembled and installed a variety of valves and fittings.
4. Eliminated risks by correctly identifying potential safety hazards.
5. Interpreted blueprints to determine locations, quantities and sizes of materials required.
6. Selected the type and size of piping required for each project.
7. Secured pipes to structures with clamps, brackets and hangers.
8. Expanded trade knowledge by networking with colleagues and participating in courses and seminars.

Experience

2-5 Years

Level

Junior

Education

High School Diploma

Description :

1. Installed piping in buildings for cold, hot, constant chilled, waste water, and runoff water with copper and carbon steel piping.
2. Engaged in team meetings to organize work areas and time management.
3. Used the training that I received to do my objectives for the day in a safe and timely matter.
4. Every day there was a goal to reach and I always surpassed that.
5. Kept all work areas clean and safe from any hazards.
6. Organized and cleaned areas with pipe fittings, pipes, and storage containers.
7. Daily goals were to finish what you were assigned to do and to watch each other's back.

Experience

0-2 Years

Level

Entry Level

Education

Bachelor Of Science

Description :

1. Performed pipe fabrication, installation and fitting according to proper specifications.
2. Identified and located required tools prior to starting each project.
3. Inspected pipes and piping systems to assess their quality and condition.
4. Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
5. Cut and beveled piping using cutting torches, saws and threading machines.
6. Maintained tools and equipment to keep them in excellent working condition.
7. Followed relevant codes, regulations and safety techniques.
8. Performed emergency on-call work hours during the evening, weekends and some holidays.

Experience

2-5 Years

Level

Executive

Education

GED