Pipefitter Resume Samples

Description :

1. Attached pipes to walls, structures, or fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
2. Assembled or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
3. Layout full-scale drawings of pipe systems, supports, and related equipment, following blueprints.
4. Turned valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
5. Cut, thread, or hammer pipes to specifications, using tools such as saws, cutting torches, pipe threaders, or pipe benders.
6. Measured and mark pipes for cutting or threading.
7. Fitted pipe for welders to weld and made sure they passed site specifications.
8. Operated and supervised equipment along with replenishing materials as required.
9. Selected pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications.

Experience

0-2 Years

Level

Entry Level

Education

High School Diploma

Description :

1. Planned and performed work involving the installation, modification, and repair new or existing piping systems.
2. Assisted in directing all apprentices, rigging & fitting 60" carbon steel on the largest construction site in the united states for the homeland security project UDC.
3. In charge of the distribution piping all 24" and up to the equipment in the chiller plant.
4. Installed, repaired, and maintained pipes that carried acid, throughout office buildings.
5. Knowledgeable of the dangerous nature of chemicals that the pipes were transporting.
6. Used forklifts, two people scissor lifts to large scissor lifts, telescopic boom lifts.
7. Responsible for properly fabricating and/ or installing piping systems in various refineries.
8. Installed sprinkler pipe in new installs, cut/fab/thread pipe, install mains, branch lines, and all fire sprinkler components according to the print.

Experience

7-10 Years

Level

Senior

Education

Certificate

Description :

1. Planned pipe system layout installation, or repair, according to specifications.
2. Inspected, examined, or tested installed systems or pipe lines, using pressure gauge, observation, or other methods.
3. Selected pipe sizes, types, or related materials, such as supports and hangers.
4. Attached pipes to bulkheads, such as tanks, using brackets, clamps, tools, or welding equipment.
5. Assembled or secure pipes, tubes, fittings, or related equipment, according to specifications, by welding, brazing, cementing, soldering, or threading joints.
6. Responsible for the installation and maintenance of etchers, acid sinks, coaters, sputters and ovens.
7. Responsible for the installation of ultra-high purity piping systems at Philips corporation.
8. Utilized specific tools such as saws, cutting torches, pipe threads, benders, and welders.
9. Performed all task assigned wearing the proper PPE and adhering to all safety rules and regulations.

Experience

0-2 Years

Level

Entry Level

Education

Diploma

Description :

1. Threaded, and hammered pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders.
2. Assembled and secured pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.
3. Attached pipes to walls, inspected, examined, and tested installed systems and pipelines, using pressure gauge, hydrostatic testing, observation, or other methods.
4. Laid out full-scale drawings of pipe systems, supports, and related equipment, following blueprints.
5. Planned pipe system layout, installation, and repair according to specifications.
6. Selected pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications.
7. Dip nonferrous piping materials in a molten tin and lead to prevent erosion or galvanic and electrolytic action.
8. Assisted in rebuilding boilers in paper mill powerhouses as well as being proficient with a torch, can cut a bevel as well as penetrations.
9. Build base plates, fabricate piping systems (butt-welds, socket-welds, threaded) pack bearings, set pumps, replace shafts.

Experience

0-2 Years

Level

Entry Level

Education

High School

Description :

1. Diagnosed, repaired, and/or overhauled refrigeration equipment, refrigeration systems, and/or temperature control systems.
2. Repaired, replaced, and installed all plumbing fixtures, and services to those fixtures, e.g. piping, fittings, valves, etc.
3. Repaired, replaced, serviced and installed heating and refrigeration units and gas appliances.
4. Uncrated and moved plumbing equipment, refrigeration units and gas appliances.
5. Repaired and/or replaced high temperature and chilled water lines.
6. Performed an assortment of plumbing tasks to renovated or new construction spaces for offices and/or instructional areas.
7. Selected type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications.
8. Inspected worksite to determine the presence of obstructions.

Experience

5-7 Years

Level

Executive

Education

Associates

Description :

1. Independently working on projects, while offering process coordination expertise, cooperation with other teams, and safety training for new hires.
2. Complying with all state plumbing codes throughout the duration of each project.
3. Reading blueprints to determine appropriate materials and procedures for each project.
4. Managing job site hazards by accurately locating biohazards, low-grade radiation, and chemicals.
5. Working with a certified pipe welders by providing accurate pipe preparation and fitting.
6. Inspecting structures to avoid any obstruction and delays throughout the project.
7. Testing piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.
8. Welding pipe supports to structural steel members.

Experience

10+ Years

Level

Management

Education

High School Diploma

Description :

1. Threaded pipe using threading machine. Secured pipes to structure with bolt up, clamps, brackets, tack welding and hangars using hand tools and machines.
2. Tested piping system for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.
3. Compared and recognized differences in the size, shape, and form of lines, figures, and objects.
4. Read and understood the plans, isometrics, arrangement drawings, details, specifications, erection manuals, and/or blueprints and makes decisions based on measurable criteria.
5. Visualized objects in three-dimensions from plans and drawings.
6. Worked within precise limits and ASNI and ASME standards of accuracy.
7. Possessed skilled knowledge of pipe fittings, bolts, valves, etc. as required.
8. Assembled and secured pipes, tubes, fittings, and related equipment according to specifications by welding and threading joints without errors.

Experience

10+ Years

Level

Consultant

Education

Diploma

Description :

1. Assembled, fabricated, maintained and repaired piping systems which carry water, steam, chemicals or fuel used in heating, cooling, lubricating and other processes.
2. Assembled and installed a variety of metal or nonmetal pipes and pipe fittings using threaded caulked soldering, brazen, fused, or cemented joints, and hand tools.
3. Secured pipes to structure with bracket, clamps, and hangers, using hand and power tools.
4. Installed and maintained refrigeration and air conditioning systems including compressors, pumps, meter, pneumatic and hydraulic controls, and piping.
5. Testing piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.
6. Welding pipe supports to structural steel members.
7. Observing production machines in assigned area of the manufacturing facility to detect machinery malfunctions. 
8. Loading, transporting and unloading material, tools, equipment, and supplies.

Experience

7-10 Years

Level

Senior

Education

High School Diploma

Description :

1. Assembled and installed a variety of metal or nonmetal pipes and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints, and hand tools.
2. Secured pipes to structure with bracket, clamps, and hangers, using hand and power tools.
3. Installed and maintained refrigeration and air conditioning systems, including compressors, pumps, meter, pneumatic and hydraulic controls, and piping,
4. Tested piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks.
5. Welded pipe supports to structural steel members.
6. Observed production machines in assigned area of the manufacturing facility to detect machinery malfunctions. 
7. Loaded, transported and unloaded material, tools, equipment, and supplies.
8. Assisted in lifting, positioning and securing of material and workpieces during installation.
9. Performed minor maintenance of cleaning activities of tools and equipment.

Experience

0-2 Years

Level

Entry Level

Education

Associates

Description :

1. Inspected subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action.
2. Maintained positive working relationships with all members of the crew.
3. Provided feedback to ensure all materials, tools, equipment, and information is available for the work.
4. Looked for opportunities for improvement in all tasks, means, and methods regarding the work and be willing to learn from others.
5. Possessed effective verbal and written communication skills.
6. Eliminate waste such as waiting, rework, transporting, material storage and time
7. Produced high-quality work, safely and productively at all times.
8. Traced systems formal function by operational test runs, visual inspection using technical manuals, schematics and blueprints and using test equipment.
9. Worked with a journeyman in developing modifications, new assemblies, substitution or corrections to machinery and equipment.

Experience

2-5 Years

Level

Junior

Education

High School Diploma