Pipeline Engineer Resume
Summary : Pipeline Engineer with nearly 15 years of experience working on both large and small projects for pipelines 6-26 in diameter in both onshore and offshore applications. Experience with pipeline routing; hydrostatic testing; stress calculations; HDD; crossings and relocations; cost and time estimates and proposals for petroleum products and natural gas pipeline systems.
Skills : Microsoft Office, Abaqus, Matlab, Mathcad, CFD, Bilingual Spanish, Technical Writing, Outlook.
Description :
- Analyzed the on-bottom stability of the 42 OD gas export pipeline using AGA/PRCI Submarine Pipeline On- Bottom Stability software level 2 (quasi-static analysis).
- Transported natural gas from the south of Texas, USA to Veracruz, Mexico.
- BP, Hopkins, Gulf of Mexico Performed finite element analysis (FEA) on a 13 OD gas export pipeline in 4350 ft.
- Calculated the maximum axial load that the PLETs have to withstand during different loading conditions which was used for the jumper structural design.
- Developed finite element analysis (FEA) to investigate the bridge crossing design for a 6 x 10 Pipe in Pipe (PIP) flowline, a 5 dynamic umbilical, and a 4 static umbilical in 5900 ft.
- Calculated the contact force and contact pressure at the crossings under various loading conditions.
- Checked the maximum stress in the crossing PIP flowline as well as the Minimum Bending Radius (MBR) of the umbilical.
Experience
10+ Years
Level
Senior
Education
Master's
Pipeline Engineer Resume
Summary : Pipeline Engineer will be responsible for the design, development, and maintenance of pipeline products and software. This includes being responsible for designing and developing new pipeline products, as well as supporting existing pipeline products.
Skills : Decline Curve Analysis and Well Logging MS Office,.
Description :
- Processed reports from completed ILI tool runs utilizing NuStar software, and prepare appropriate repair recommendations for the particular pipeline segment.
- Performed pipeline integrity risk studies and communicate results to Subject Matter Experts (SME).
- Developed and maintained NuStars pipeline integrity assessment plans.
- Modified the integrity programs plans and procedures to reflect conclusions drawn from integrity inspections and risk analysis.
- Participated and facilitated periodic Post ILI Review, Preventive and Mitigative Action (P&M), with field personnel.
- Supported state and federal compliance audits.
- Coordinated and managed NDE inspections.
Experience
10+ Years
Level
Senior
Education
GED
Pipeline Engineer Resume
Objective : Pipeline Engineer is responsible for the design, construction, and maintenance of the production equipment and systems used to produce oil and natural gas.
Skills : Microsoft Office, Primevra, EPCIC, EPM, Project Management, Contracts Initiation, Scope Definition, Mechanical Design.
Description :
- Provided technical support as part of an engineering team on projects reporting directly to Farnsworths project manager.
- Provided project management on small/simple projects as a representative reporting directly to the Owners project manager.
- Provided technical and design support for the development of projects (conceptual through final design and as-built projects).
- Observed construction at field locations to ensure compliance with drawings and specifications.
- Experienced in oil, gas, or similar utility industry a plus.
- Driven progress towards process optimization by studying and analyzing performance data then developing and deploying engineering solutions.
- Provided guidance and support to operational management and shop team through quality expertise leading and facilitating the optimization of new product industrializations.
Experience
2-5 Years
Level
Executive
Education
GED
Pipeline Engineer Resume
Summary : As a Pipeline Engineer, responsible for Developing project scope documents, schedules, contractors bid documents, manage the bid process including job showing, select contractors, select and requisition materials, coordinate permitting, and manage contractor and other project activities.
Skills : MS Office, Leadership.
Description :
- Led a group of six people reviewing and approving pipeline records to support MAOP/MOP, saving more than 10 million dollars for company.
- Led a group of three people filing PHMSA annual report.
- Conducted validations, determinations and corrective actions to assure the pipeline is operating per codes.
- Managed projects for inspection/testing, fabrications with Integrity.
- Supported Operations and company representatives to support Federal/State audit, all audits passed.
- Developed all company and departmental O&M manuals, standards, specifications, procedures, forms, etc.
- Coordinated with various company departments regarding compliance related technical issues.
Experience
7-10 Years
Level
Management
Education
M.S.
Pipeline Engineer Resume
Summary : Over 15 years of experience in Oil Gas, with emphasis on PEP/Scope, Definition, Conceptual Studies, Front End Design, Detailed Engineering, Project Management Consultant (PMC) Inspection /Testing and Commissioning/Project Management, Construction Support. Capable of working independently and within a cross-functional team environment to meet project timing, cost, engineering, and customer deliverables.
Skills : Decline Curve Analysis and Well Logging MS Office,.
Description :
- Assured product and process quality by designing testing methods.
- Tested finished- product and process capabilities.
- Established standards; confirming manufacturing processes.
- Assumed responsibility for quality improvements as they relate to an area within a facility or a specific project or project within a facility.
- Managed the application of root cause analysis in problem-solving.
- Provided technical guidance to the manufacturing facility as it industrializes new technology or new processes.
- Prepared product and process reports by collecting, analyzing, and summarizing information and trends.
Experience
10+ Years
Level
Senior
Education
GED
Pipeline Engineer Resume
Objective : Pipeline Engineer with experience in gas and liquids integrity practices and a record of success implementing engineering design and cost-saving solutions to uphold operational excellence. Known for ability to effectively lead teams, perform risk assessments, manage data and develop remediation plans.
Skills : GIS, AUTOPIPE, CEASAR II.
Description :
- Involved in proposal and bid activities (pipeline projects) - Responsible for development and preparation Pipeline CTRs pre-FEED and FEED bid activities.
- Involved in Preparation of onshore pipeline engineering man-hour estimate for Pre-FEED & FEED, Pipeline execution statements and plans.
- Responsible for preparation of pipeline engineering job notes, pipelines and flowlines tie-in design & branch reinforcement calculations & report.
- Performed pipe stress analysis for flowlines & export lines using AUTOPIPE and preparation of stress analysis reports, also responsible for preparation of flowlines MTO, pipelines design & construction work packs, checking of typical crossings drawings,routes approach drawings, alignment sheets & tie-in assembly drawing for completeness and accuracy.
- Responsible for development of pipelines route corridors, existing BCDS, proposed CDS-2 facility, IPD's & RDS's locations site visit survey, water injection clusters drawings, transfer lines route corridors & field layout drawings and coordination activities with CAD design engineers.
- Responsible for preparation of Basis of Design, main oil line, gas export lines, fuel gas lines, water injection headers, production flowlines and transfer pipelines mechanical design (including wall thickness analysis, road & rig crossing and stability), preliminary upheaval buckling analysis, preliminary pipeline stress analysis using CAESAR II.
- Responsible also for preparation of pipeline project SOWs, philosophies, specifications, data sheets, pipeline reports and MTO.
Experience
0-2 Years
Level
Entry Level
Education
BS In Pipeline Engineering
Pipeline Engineer Resume
Objective : Detailed-oriented and thoughtful professional prepared to excel in the field of engineering and contribute to organizational objectives. Finely tuned analytical and research skills with a dedication to clear communication and presentation. Adapt at maintaining an exceptional rate of productivity, accuracy, and efficiency; well organized and proficient with details.
Skills : AutoCAD, 3D Modeling, GD&T, Solidworks, Autodesk Inventor, Revit.
Description :
- Calculated for long run flare line and gas pipeline on major pipe rack; design the expansion loops and direction anchor point; calculate pressure surge force, slug force.
- Prepared material requisition for all piping material including fittings, valves, pipes, pipe supports, equipment assembly such as pig launcher & receiver, closure door, case isolator, piggable fitting, etc.
- Performed stress analysis with CAESAR-II program on crossing country seawater pipeline, analysis such as thermal, seismic, transient and wind load case.
- Responsible for development and preparation pipeline integrity review report (8 diameter gas pipeline) using validated in-house spreadsheet (ASME B31G) corrosion defect analysis to determine the potential integrity of the pipeline based on operation pressure of 2.46 MPa and MOP of 3.43 MPa.
- Reviewed and managed projects in terms of economics, OSHA Safety, Kinder Morgan Engineering Standards, Construction Standards, and Operating and Maintenance Procedures.
- Traveled estimated to be from 20 to 35% to field sites and offices with occasional overnight stays. Some extended hours and after-hours work will be required.
- Learned & applied the company's design and operating philosophy within the field locations to meet corporate goals for safety, regulatory compliance, efficiency, and profitability.
Experience
2-5 Years
Level
Executive
Education
Bachelor's
Pipeline Engineer Resume
Summary : Over 15 years of experience in Oil Gas, with emphasis on PEP/Scope, Definition, Conceptual Studies, Front End Design, Detailed Engineering, Project Management Consultant (PMC) Inspection /Testing and Commissioning/Project Management, Construction Support. Capable of working independently and within cross functional team environment to meet project timing, cost, engineering and customer deliverables.
Skills : Decline Curve Analysis and Well Logging MS Office,.
Description :
- Designed MLBVs (Mainline Block valve) calculations and drawings.
- Conducted Wall thinning calculations.
- Developed Reports like class location report and Bend thinning report.
- Developed Material Requisitions for Class 3 estimates.
- Checked of Alignment Sheet Route selection.
- Prepared of specifications (scrapper traps, line pipe, isolation joint, valves, etc) Pipeline calculations like wall thickness and its verification, road crossing, etc Checking of Alignment Sheet MTO Verification.
- Supported daily Operations & Maintenance activities.
Experience
7-10 Years
Level
Management
Education
GED
Pipeline Engineer Resume
Summary : A result-oriented Pipeline Engineer professional seeking challenging supervision/coordination assignments in Oil and Gas environment More than 23 years of international diverse experience in construction, installation, operations, maintenance, and services functions (mainly in the oil and gas sector) with reputed regional and multinational companies.
Skills : Microsoft Powerpoint, Pipeline Toolbox.
Description :
- Responsible for pipeline operations and maintenance (routine, corrective & preventive) for the Muscat region.
- Additionally responsible for all troubleshooting works (pipeline discipline) in all OGC operational areas.
- Controlled and liaisoned all activities carried out by subcontractors.
- Managed OJT (on-the-job training) programs for Omani colleagues.
- Successfully headed valve maintenance training course (OJT) for Omani colleagues Prepared proposals & trained Omani's for the in-house maintenance team.
- Attended several emergency call-outs and rectified the problem successfully.
- Responsible for recording and maintaining engineering records and maintain good client relationships.
Experience
7-10 Years
Level
Management
Education
Bachelor Of Science
Pipeline Engineer Resume
Objective : A resourceful, dedicated, energetic and an efficient result-oriented person that focuses on achieving project goals and objectives or any assigned responsibility without compromising schedule, cost and quality. I have more than 14.5 years' experiences in Oil and Gas Industry with specialization in onshore/offshore pipeline conceptual designs.
Skills : Microsoft Office, Primevra, EPCIC, EPM, Project Management, Contracts Initiation, Scope Definition, Mechanical Design.
Description :
- Detailed Engineering Design project designed to transport compressed associated gas via new pipeline network from the EDOP gas compression platform for injection into the ETIM and ASASA reservoirs and a new multiphase pipeline from ETIM D to ETIM production platform.
- Worked with Operations, Engineering, Environmental Health & Safety, Accounting, Business Development, Gas Control, Land and Right of Way, Codes and Standards, and other internal departments to maintain and improve the integrity of the companys infrastructure.
- Managed $2.5M crude oil storage tank project.
- Monitored, completed studies and reviews, assessing risk / benefit, generating recommendations and developed projects, quality assurance programs, etc. as required to achieve the task.
- Designed was to lay a pipeline that will transport production fluid from IDAMA /JOKKA fields through a new 12-in multi-phase pipeline and the extension of the existing 8-in multiphase pipeline from CNL DP to Robertkiri GCWIP.
- Provided engineering support to operations on a daily basis.
- Effectively prioritized workload between multiple projects.
Experience
2-5 Years
Level
Executive
Education
GED
