Rig Mechanic Resume
Objective : Responsible for Assisting with special projects involving hydraulic mechanical components including closed-loop and open-loop systems, hydraulic pumps, and motors.
Skills : MS Office, Management Skills, Mechanical Skills.
Description :
- Installed, operationally checked out, adjusted, rigged, and pressured check systems.
- Performed bench and assembly line operational checkout, troubleshooting, repair, and adjustment of electrical and electronic systems, lighting circuits, power plant systems, wing fold circuits, missile launch racks, aircraft instrumentation, provide flight test instrumentation, fire wiring system, fuel system.
- Assembled, installed, checked out physical characteristics, and modify wire bundles to aircraft of aircraft mock-ups.
- Benched assemble electrical or electronic components and conductors into electrical units and systems before methods and procedures have been established.
- Cut, identified, stripped, tinned, attached components, and pot to prepare wire for assembly.
- Installed wire bundles or other electrical and electronic components in aircraft, power plants or ground support equipment.
- Assembled aircraft and/or spacecraft structures or aircraft and/or spacecraft support equipment structures with or without the aid of jigs and fixtures by drilling, reaming, countersinking, stop countersinking, dimpling as assigned, burring, fastening, filing, filling, fitting, aligning, trimming, shimming and remove surface defects as assigned.
Experience
2-5 Years
Level
Executive
Education
GED
Rig Mechanic Resume
Objective : Responsible for ensuring that all work performed by 3rd party personnel are performed in a safe and efficient manner, Attending daily morning meetings and weekly safety meetings; and ensuring all personnel is operating safely in accordance with company policy.
Skills : MS Office, Mechanical SKills, Training SKills.
Description :
- Performed skilled assembly operations such as: shimming, fitting, trimming, and aligning which may vary considerably from one assembly to another as with fairings and the mating of major assemblies.
- Realigned or replaced ribs, bulkheads, or stringers in skinned assemblies.
- Established from blue-prints with or without firm callouts, butt, center, chord, station, and water lines.
- Blind pick up of hole locations for blank parts from the existing structure.
- Corrected cans, buckles, wrinkles in outer skins and remove surface defects as assigned.
- Observed and assisted qualified electricians as they layout, install, repair, and maintain all types of electrical equipment such as generators, motors, transformers, high voltage switchgear, and breakers.
- Observed and assisted qualified mechanics as they rig, move, install, repair, and retime a wide variety of machines, pneumatic and hydraulic systems, pumps, valves, and compressors.
Experience
2-5 Years
Level
Executive
Education
GED
Rig Mechanic Resume
Objective : Rig Mechanic with 3+ years of experience in-Participating fully in all Health, Safety, and Environmental initiatives and safety programs and in pre-tour weekly safety meetings, Following Diamond Offshore Global Excellence Management Systems (G.E.M.S).
Skills : Planning Skills, Observation Skills, Installation Skills.
Description :
- Observed and assisted qualified wind tunnel employees in the repair of damaged equipment by troubleshooting, disassembling, and replacing the necessary components.
- Became familiar with electrical schematics and mechanical drawings.
- Observed and assisted qualified wind tunnel employees in fabricating and modifying equipment for use in wind tunnel testing.
- Observed and assisted in the set-up of equipment for model calibrations and model installations.
- Performed general maintenance and housekeeping of wind tunnel areas and equipment.
- Followed standard safety procedures to prevent injury to self and others.
- Used of tools and equipment, etc. while performing work
Experience
2-5 Years
Level
Executive
Education
GED
Rig Mechanic Resume
Objective : A reliable, committed and conscientious employee who can take directions, Work in a team as well as working on my own initiative. I pride myself in maintaining high standards of workmanship and expect the same from those working alongside and of those under my supervision. Safety is paramount, both for myself and that of all my co-workers and also to the well being of the rig and as such, any task undertaken is thoroughly planned and prepared.
Skills : Forklift Operator, Skidsteer Operator, Excavator Operator, Front End Loader Operator.
Description :
- Participated in weekly safety meetings and pre job meetings as required.
- Performed daily inspections on mechanical equipment all around the rig.
- Supervised and maintained drilling equipment: Top Drive, Draw Works, Bridge Rakers, Riser Crane, Cat Walk machine, Iron Roughneck, Fingerboard, Pipehandling machine, Man Riding winches on board and carry out necessary maintenance work on the equipment.
- Maintained work on Mud handling equipment in the Shale Shaker Room, Mud Pump Rooms and Pontoon Pump Rooms: Mud Agitators, Degassers, Mud Centrifuges, Mud Pumps, Mud Transfer Pumps etc.
- Fabricated parts using Lathe Machine, Milling Machine, Pipe Threading Machine, Stand Drill, Press Machine, Hose Crimping Machine etc.
- Maintained and repaired on these equipment.
- Maintained and repaired marine equipment Deck Cranes, Anchor winches, Thrusters, Lifeboat Davit Winches.
Experience
2-5 Years
Level
Junior
Education
GED
Rig Mechanic Resume
Objective : Highly qualified Rig Mechanic with extensive experience with drilling equipment, hydraulic equipment, and heavy equipment including cranes. Specializing in Hydraulic diagnostics and diesel engine diagnostics. NOV drilling equipment Trained By NOV on Drawworks, TopDrives, IronRoughnecks, PRS, HydraRackers, NOV Triplex Mud Pumps.
Skills : Mig, Arc, OXY/ACETYLENE Welding And Cutting, Sheet Metal Fabrication, Auto Body Paint Prep, Auto Electronic Installation, And Troubleshooting.
Description :
- Helped with the testing and commissioning as well as installation of drilling equipment on new build project Noble Bob Douglas 6th gen drillship in Hyundia shipyard Ilsan South Korea Prepare Job Safety Analysis (JSA) forms and compile data for work instruction manuals.
- Supported Bob Douglas Drillship as a rig mechanic for first 2 wells in New Zealand deep water.
- Repaired ST-160 Iron Roughnecks TDX 1250 Top Drive and Drawworks AHC 1250 and SSD 750 Repair and service Ringline and Active heave hydraulic power units.
- Maintained maintenance planned and corrective work orders by use of SAP.
- NOV Trained and Certified for Rig Equipment Maintenance.
- Assisted with the requisition of parts and supplies to set up successful maintenance department.
- Worked with third party vendors to repair and advance equipment needing factory upgrades.
Experience
2-5 Years
Level
Junior
Education
High School Diploma
Rig Mechanic Resume
Objective : Obtain a Rig Mechanic position which allows me to utilize my management and mechanical skills, knowledge of quality assurance, history of program development, and training experience to further my career.
Skills : Service Tech, Maintenance, Communication Skills.
Description :
- Responsible for Preventive and Corrective Maintenance on all Topside Mechanical equipment including but not limited to: Top Drive Systems (Including Auxiliaries and attachments) Rotary Table equipment Draw works (Including Auxiliary equipment) Derrick (Crown Block, Fingerboards, Travelling block, etc.) Pipe-handling systems Tubular delivery systems Make-up system (Iron Roughneck (AR 4500, ST 120), Hydraulic Catheads & Bucking Machine) Mud Pumps (including auxiliaries) Hydraulic Power Units Mud processing equipment (Shakers, Degassers, Agitators, etc.).
- Managed troubleshooting efforts for drilling tools and systems including complex hydraulic systems and facilitates repairs down to the lowest replaceable unit.
- Documented equipment historical data for the purpose of reliability analysis and planning necessary upgrades.
- Initiated a MAF request when necessary to improve equipment reliability, operations efficiency or safety concerns Maintains adequate spare parts for systems in his area of responsibility to ensure minimal downtime and performs periodic inventory of same.
- Reviewed Mechanic's department weekly maintenance system entries for completeness and accuracy.
- Reviewed Mechanic's daily checklist for follow-up actions to any noted discrepancies Holds weekly Stop tour with all Mechanical Department Personnel selecting a different area each week Supervises the order, cleanliness and housekeeping in areas of responsibility.
- Kept written hand-over notes to ensure efficient and accurate transfer of information.
Experience
2-5 Years
Level
Executive
Education
High School Or Equivalent
Rig Mechanic Resume
Objective : To work in the well-established environment, utilizing previous experiences. But open to new and challenging opportunities with talented people who will share my vision for growth to drilling way of life. Self-starter with relentless motivation.
Skills : Word, InDesign, Installation SKills.
Description :
- Perform assigned duties in a safe efficient manner in accordance with Company Policy.
- Performed preventive maintenance and inspections on Engines, Compressors, and Hydraulic Equipment using different measurement tools to check the manufacturer's tolerances.
- Diagnosed mechanical, hydraulic, and pneumatic problems and determined how to correct them.
- Knowledge of hand signals and safe working procedures for rigging and equipment handling.
- Installed new machinery/equipment and commissioned equipment.
- Oversaw the design and installation of piping for air, water, and chemical lines.
- Rebuilt engines, performed tune-ups and repairs as per manufacturer's specification.
Experience
2-5 Years
Level
Executive
Education
High School Diploma
Rig Mechanic Resume
Summary : Knowledgeable maintenance technician skilled in reading and interpreting blueprints, diagrams, and drawings with over 17 years of mechanical maintenance experience. Highlights Troubleshooting specialist Fabrication professional Welding safety precautions Initiative to work independently Strategic thinker Metalworking ability OSHA regulatory compliance Effective team leader HAZMAT handling CPR certified Valid Texas class B CDL Equipment maintenance Strong verbal communication Clean D.
Skills : Maintenance Of Rig Equipments, Designing Skills, Mechanical Skills.
Description :
- Attended company training as outlined in the Training Matrix.
- Created detailed Work Instructions for various jobs.
- Helped develop HSE plans for the entire rig by the use of Check6 Software.
- Responsible for maintaining and repairing all rig equipment including 2000 HP DC Motor driven Tri-Plex pumps, AC motor driven centrifugal pumps.
- Worked in all phases of rig repairs.
- Ensured that all relevant equipment is maintained and maintenance is recorded.
- Maintained sufficient stock of spare parts and materials as required.
Experience
10+ Years
Level
Senior
Education
High School Diploma
Rig Mechanic Resume
Objective : Responsible for Assembling aircraft and/or spacecraft structures or aircraft and/or spacecraft support equipment structures with or without the aid of jigs and fixtures by drilling, reaming, countersinking, stop countersinking, dimpling as assigned, burring, fastening, filing, filling, fitting, aligning, trimming, shimming and remove surface defects as assigned.
Skills : Mechanical Maintenance, Planning SKills, Operating Skills.
Description :
- Completed equipment inspections in accordance with engineering drawings.
- Tested and assembled oilfield equipment.
- Completed other duties and/or projects as required and assigned.
- Assembled precision assemblies, set up and operate ream fixtures to drill, ream, countersink, spot face, hone, and bore for mating major assemblies.
- Setup and operated shot peen equipment and accessories for stress relieving assemblies as required.
- Installed press-fit bushings and force-fit bushings. File, fit, hone, ream, drill, tap, saw, burr and adjust.
- Assembled a variety of production aircraft and spacecraft parts and install aircraft equipment, support equipment, or power plant equipment.
Experience
2-5 Years
Level
Junior
Education
HND In Mechanical Engineering
Rig Mechanic Resume
Headline : A strong background in facility maintenance and construction. a hard worker, self-motivated, and very dependable. With my background in business management and experience in offshore drilling rigs and the construction and food industry I feel could be a great asset to your company.
Skills : Hydraulics, Construction, Mechanically Inclined, Maintenance, Computer, Communication, Electrical, Welding, HVAC.
Description :
- Maintained all hydraulic operated systems on rig with hydraulic technician.
- Trained and supervised new employees that move into the mechanical dept.
- Unpacked and assembled all new merchandise using variety of power tools.
- Used hoists and cranes to lift work pieces to machine.
- Maintained compliance with company standards to perform all maintenance activities.
- Followed standards and procedures to maintain safe work environment.
- Worked extensively with the electrician giving me a good knowledge of incoming power and distribution, 3 PH power and AC motors, and DC traction motors and SCR's.
Experience
5-7 Years
Level
Junior
Education
G.E.D
