A Steamfitter assumes responsibility for laying out, assembling, fabricating, maintaining, and repairing piping systems that carry water, steam, chemicals, and fuel in heating, cooling, and other process piping systems. Main duties listed on the Steamfitter Resume include the following- supporting the safe execution of work, installing supports, valves, piping, and control systems; reading and interpreting drawings, blueprints, and specifications to determine layout requirements, cleaning and maintaining pipe units and fittings and flush system, and preparing cost estimates for clients.
Even though the working area may vary, the skills and abilities are universally common and include the following – high degree of mechanical aptitude, analytical skills, strong math skills to take accurate measurements, the ability to determine the repairs needed, strong analytical skills, and physical stamina. Most employers require the Steamfitters to have at least a high school diploma or GED and relevant apprenticeship programs.
Summary : Self -motivated and entergetic piprfitter with 8+ years' hands on experience in installing and maintaning pipe systems, and supports.Well versed in assembeling steam pipe, heading, and cooling.Responsible and punctual skilled in stick welding, interpreting blueprints and drawings and operating forklifts.
Skills : Total Project Control, Riggers License, OSHA 10, First Aide/CPR, Computer Literate.
Description :
Worked at several projects for the installation of HVAC systems in new commercial construction.
Sites included FDA White Oak, Dulles Discovery Phases I & II, and Tower Oaks.
Selected and prepared materials for job.
Measured and cut piping.
Ran copper, cast iron, steel, plastic, and screw piping.
Cut, thread, and assembled pipe fittings, using various types of shop machinery and equipment.
Seat hooked up and tested all equipment.
Experience
7-10 Years
Level
Management
Education
BS In Journeyman
Steamfitter Resume
Summary : As a Steamfitter, responsible for Installing HVAC equipment and systems (e.g. actuators, compressors, building control systems, DDC sensors, heat pumps, control panels, energy management control systems, pressure reducing valves, etc.)
Skills : Management Skills, Control System.
Description :
Fired Extinguishers & Eye Wash Stations Servicing, maintenance, inspection and testing of all fire extinguishers & eye wash stations and other safety related equipment.
Changed of Filters All filter inspections and filter replacement for air handling units and DX units.
Cleaned condensers and roof drains.
Unloaded solvents and oil as needed.
Rebuilt pumps and valves.
Insulated & labeled pipes.
Performed environmental inspections.
Experience
7-10 Years
Level
Management
Education
BS In Journeyman
Steamfitter Resume
Headline : Responsible for performing preventative and corrective maintenance and uses diagnostic tools and equipment associated with system repairs and installation.
Skills : Planning Skills, Maintenance Skills.
Description :
Typically worked out of an aerial lift.
Maintained hope that the economy would improve and the construction market would also improve, I have come to the point where I see no future with the union.
Assisted a journeyman level Trades Job in its assigned duties.
Performed limited skilled tasks under close direction of a journeyman in an on the job training program.
Participated in training as prescribed by an assigned journeyman or agency policy.
Maintained your tools.
Cleaned up job sites once job is complete.
Experience
5-7 Years
Level
Executive
Education
MS
Steamfitter Resume
Headline : A very mechanically inclined person, that likes to troubleshoot problems and find answers. Always like to learn new things. People and business oriented with positive mindset and attitude to get tasks done correct and efficient.
Skills : Welding, Fabricating Brazil/solder Painting Computer Microsoft Forkliftpower Tools Large Equipment House Keeping.
Description :
Fabricated, welded, chemically bond fiberglass pipe, carbon steel pipe, and stainless steel pipe, cutting using torches, saws, grinders.
instructed signals to crane operators for lifts.
Installed, repair,and maintenance mechanical piping systems for boilers, chillers and cooling towers.
Worked safely and in timely manor completing tasks.
Replaced many of cooling towers, chillers, and boilers worked on installing, and repairing piping systems of all sizes from 1/8in up to 60in.
Used Mechanical knowledge, welding, brazing, Safety, Math, Reading prints, working in groups and alone.
Confined space training.
Experience
5-7 Years
Level
Junior
Education
GED
Steamfitter Resume
Summary : Steamfitter with 12 years experience in Mechanical construction.Certified Pipewelder in both Union and Merit shop settings.All Certifications are in the 6-g,2 inch or smaller,Carbon,Stainless,and Hastaloy.Willing to relocate.
Skills : Microsoft Applications, Maintenance Skills.
Description :
Repaired, Installed and Revised, Piped systems in a FDA approved Brewery.
Included valve rebuilds, sanitary welding stainless steel, and pipe system modifications required for a time sensitive process environment.
Installed of various components with approved pipe system designs and current ASME codes.
Troubleshoot pneumatic controls and devices and rebuild or replace as required.
Made repairs to Kathabar Refrigeration system for plant cooling.
Implicated of divisional tag and lock out procedures and OSHA required procedures for safe completion of assigned tasks.
Worked in a team environment, to support company objectives.
Experience
10+ Years
Level
Senior
Education
High School Diploma
Steamfitter Resume
Objective : Motivated hard working professional with strong mechanical & customer service experience seeking a position with a company that my skills/ training can be used to thier fullest, Looking to advance & grow with company Ability Summary Customer service, maintenance, very strong mechanical background, drivers license, follow company polices, plumbing, electrical, lift 50 lbs.
Accomplished during my time as a steamfitter/pipefitter is understanding my job perform it at the best of my ability team work and understanding safety and how important going home to my love ones.
Used fitting, cutting, rigging and securing pipe safely.
Understood task at hand a getting it done safely.
Kept your work areas clean.
Kept Lead informed of job status.
Experience
2-5 Years
Level
Junior
Education
High School Diploma
Steamfitter Resume
Headline : As a Steamfitter, responsible for Preparing parts and equipment orders for purchase as requested or required and may confer with vendors, Performing work in accordance with established PWSA safety rules, regulations, policies and procedures in.
Skills : Welding Skills, Transportation Skills.
Description :
Used math skills to properly determine what parts and equipment were needed as well as what lengths of pipe were needed.
Properly used tools and equipment to cut, solder and fit pipe together in order to fabricate piping systems.
Used proper technique to lift pipe and other equipment weighing 50 lbs.
Worked as a team with other apprentices and mechanics in order to complete projects on time and in perfect working order.
Assisted with shipping and receiving of tools and equipment needed to complete projects.
Tasks completed were steel fabrication, soldering copper piping, plumbing fixture installment, planning and layout of the installation.
Completed and my position was ended as a reduction in force.
Experience
5-7 Years
Level
Executive
Education
MS
Steamfitter Resume
Objective : Responsible for Installing new or replacement heating, air conditioning and ventilation systems in new or existing PWSA facilities, accordance with all applicable federal, state, and local regulations.
Installed pipes with necessary hangers, brackets and other necessary support, aligning for welding, soldering and blazing where required, gauges, traps, thermostats, back-flow prevented units and other devices, connects pipe to fixtures and equipment.
Packed, adjusted and repaired valves of various types, repairs leaks and clear obstructions in piping, makes necessary adjustments for proper operations under pressure.
Operated pipe threading machines, hand tools, pumps and other trades-related tools and equipments.
Kept your van organized.
Responded to occasional Emergency call outs.
Performed valve repairs and rebuilds.
Knowledged and understood of steam, condensate, ammonia, compressed air, and water; hydraulic and pneumatic system knowledge.
Experience
0-2 Years
Level
Entry Level
Education
Diploma
Steamfitter Resume
Objective : Highly qualified Steamfitter with experience in the industry. Enjoy creative problem solving and getting exposure on multiple projects, and I would excel in the collaborative environment on which your company prides itself.
Performed various types of welding skills. Stick, Tig, etc.
Installed and repaired of carbon steel, schedule 5 stainless steel, copper, and PVC piping.
Performed mechanical duties such as calibrating, tuning, addressing problems, and preventative maintenance inspections.
Fired Extinguishers & Eye Wash Stations Servicing, maintenance, inspection and testing of all fire extinguishers & eye wash stations and other safety-related equipment
Changed of Filters All filter inspections and filter replacement for air handling units and DX units.
Cleaned condensers and roof drains.
Unloaded solvented and oil as needed.
Experience
2-5 Years
Level
Junior
Education
GED
Steamfitter Resume
Objective : As a Steamfitter, responsible for Directing the work of laborers and/or other personnel assisting on assigned projects, Working with computerized maintenance management tools, maintains records, and prepares accurate.
Skills : Basic Computer, Certified Nuclear Pipe Welder, Journeyman Steamfitter, Teachable And Able To Train Others.
Description :
Rebuilt pumps and valves.
Insulated & labeled pipes.
Performed environmental inspections.
Assisted Steamfitters on projects when appropriate for training purposes.
Installed and maintained piping systems, supports, and related materials.
Tested and/or operated hydraulic and pneumatic equipment for heating and cooling systems, as well as other mechanical systems that use piping.
Repaired and replaced leaks on piping systems, thermostats, and valves.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.