A Structures Mechanic is a technical person who manages the structures and repairs the aircraft and maintains the level of efficiency. A well-drafted Structures Mechanic Resume describes the following duties and tasks – examining the aircraft regularly; finding out technical defects in the aircraft, setting standards, analyzing the aircraft’s materials for ensuring quality, replacing defective parts, maintaining stock of repairing tools, installing new parts and removing old parts, coating the exterior of the aircraft; inspecting the windows and identifying cracks; replacing damaged parts; fabricating structural parts; and operating precision measuring gauges.
Those looking to work in this field must denote on the resume the following skills and abilities – mechanical skills, wide knowledge of aircraft sheet metal repairs; familiarity with machines and tools, an in-depth familiarity of aircraft specifications, standards and technical manuals; and ability to remove corrosion. Education requirements vary, but normally an engineering degree is required.
Summary : Experience on large composite and sheet metal structural system assembly and Structures. Depot level C & D Inspection work on commercial and military aircraft such as Boeing 787, F-15 Strike Eagle, P-3 Orion.
Skills : Microsoft Office, Leadership Development, Logistics.
Description :
Performed routine production structural assembly operations on structural and mechanical and/or electrical/electronic / wiring assemblies.
Worked in the assigned manufacturing production department to learn and perform a variety of structural assembly operations.
Drilled, edge filled, fitted, and assembled a variety of detail parts, skids, and assemblies.
Inspected for proper installation and integrity after completed the job task at hand.
Performed delegated Production Accountability duties associated with the processing, verification, quality auditing, and inspection.
Maintained the necessary documentation and records. Consisting of reforming, recontouring, or refitting to provide an acceptable assembly.
Performed difficult structural pick-up and rework such as removing & replacing or realigning ribs, bulkheads, stringers.
Experience
10+ Years
Level
Management
Education
Management
Structures Mechanic II Resume
Headline : Seeking maintenance position with progressive aviation organization with opportunity for interesting professional and cultural experiences.
Skills : Floor structures lead, Composite and fiberglass fabrication certified.
Description :
Programmed center wing box, cockpit, chine cap, main gear track, stringer and frame repairs, nose gear trunnion R&R.
Installed mounting tracts for belly mounted recon camera on programs first 4 aircraft, fabbed and installed electronics racks.
Wing plank changes, major, and minor structural repairs.
Changed skin bonding S duct repairs, Hush kit cowl mods lower cargo door frame repairs many major and minor repairs.
Installed, and secured parts and components, on modifications and repairs including drilling reaming, counter think, riveting/ backing.
Reviewed project drawings to perform installation activities according to specifications.
Informed of job progress and material requirements Maintained record accuracy by using a work order reporting system.
Experience
5-7 Years
Level
Executive
Education
Technology
Structures Mechanic III Resume
Summary : Supervisor in the warehouse and construction fields utilizing common sense, practicality and diplomacy. Learned to communicate in Spanish and can type 45 wpm.
Skills : Smart Team , Excel,SAP ,ISO 9000,Manufacturing.
Description :
Performed major structural modifications, internal and external, on G-550's for the Special Missions Program on the H.A.L.O.
Experienced with Pro Seal, Full, and partial filet sealing. Project for the German government and the C.A.E.W.
Installed major fittings in the internal wing, for external hardpoint wing attach points on the H.A.L.O.
Assembled entire new fin cap build-up for the new radome on top of the vertical stabilizer on the C.A.E.W.
Received Bell 206 aircraft, disassembling the aircraft, and rebuilding it through sheet metal fabrications, composite repairs.
Promoted to the maintenance of Bell 206 aircraft including replacing a roof, lower shell, and windows when indicated.
Ensured timely completion of projects using experience and organizational skills Worked closely with engineering to develop processes.
Experience
10+ Years
Level
Senior
Education
High School
Structures Mechanic I Resume
Objective : Primary duties include laying out, drilling, and debugging holes, cleaning parts with solvents, sealing (certified), and fastening at the detail and assembly levels. Recently transitioned into the Inactive Ready Reserves.
Skills : Windows Server & Client Operating Systems, Domains.
Description :
Landed Gear Door Experienced Liquid Shimming Proficient at Composite Countersink, step drilling.
Drilled and assembled frames, ribs, bulkheads, main fuselage structure.
Built and assembled inner and outer weapons doors.
Shimmed and set in liquid shim hinges, on tool jigs, set pin alignment for free pin movement.
Installed Blind Rivets, Eddie bolt fasteners swedged fasteners, Torqued fasteners to specs.
Contracted Laborer for Raytheon, attached to the Hawker Production Line.
Installed air conditioning ducts and tubing with venturi units on the interior of the Hawker main fuselage, APU door modifications.
Modified the customer's requests, and the installations of the internal fuselage deicing lines, pump, filters, valve assemblies.
Experience
2-5 Years
Level
Junior
Education
Sales Representative
Structures Mechanic Resume
Summary : Seeking journeyman level position where skills and experience can be used to benefit organization. Structures Mechanic is responsible for the maintenance and repair of structures, fixtures, and equipment. This includes cleaning and inspecting, maintaining, repairing, and replacing all types of structures.
Skills : MS-Office, Excel.
Description :
Aligned and fitted structural assemblies manually, or signal crane operators to position assemblies for joining.
Assembled and fitted prefabricated parts to form subassemblies. Join structural assemblies such as wings, tails, and fuselage.
Assembled, installed, and connected parts, fittings, and assemblies on aircraft, using layout tools, hand tools, power tools, and fasteners such as bolts, screws, rivets, and clamps.
Positioned and aligned subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
Cut, trimmed, filed, bent, and smooth parts, and verify sizes and fitting tolerances in order to ensure proper fit and clearance of parts.
Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations.
Aligned, fitted, assembled, connect, and install system components, using jigs, fixtures, measuring instruments, hand tools, and power tools.
Experience
10+ Years
Level
Senior
Education
Diploma
Structures Mechanic/Technician Resume
Summary : Highly versatile Structural Mechanic / Interiors Technician with extensive hands-on experience. Ability to perform all the duties of a mechanic; manufacture and apply sheet-metal and composite repairs.
Skills : Structures/Bonder, MS-Office.
Description :
Led Edge Slats Position 1 Locate parts in assembly jig. After location verified by QC perform drill out of parts.
Verified by QC parts were reassembled and specified hardware installed.
Verified the part was in conformance per BAC spec all skin quality (alclad) surfaces were covered with protective material.
Located upper and lower skins in fixed assembly jig then located stringers on skins using tooling location details.
Located FWD and AFT spars into wing Fixed Assembly Jig with tooling pins inserted into tooling holes.
Verified spar location ribs were then located to corresponding bustlines. Ribs then permanently installed with the proper hardware.
Verified by QC then drilled out disassembled and deburred and holes verified by QC.
Experience
10+ Years
Level
Senior
Education
Diploma
Asst. Structures Mechanic Resume
Objective : To obtain a position that would offer an interesting, challenging and rewarding career. Obtained and to gain knowledge of the counseling direction, and to be able to accomplish an exciting career.
Skills : Microsoft Office, Leadership Development, Logistics.
Description :
Wrote training plans writes plans on provisions, and very proficient in Microsoft Office.
Strong communication skills and able to multi-task track and maintain our daily performance.
Provided technical information and training to outside sales.
Supported functions to special projects to support sales. Verify and removes surface defects, and polish surfaces.
Positioned and designed and implement total inventory; stock numbers and handle counts of all items.
Rejected defective parts and marks for defects and notifies the management of non-conformances.
Responsible along with our team to ensure that we build the highest parts possible, make a schedule on time.
Experience
2-5 Years
Level
Junior
Education
Rehabilitation
Structures Mechanic/Executive Resume
Headline : Licensed Air frame and Power plant Technician with a structural background. Have a vast knowledge in aircraft maintenance from basic upkeep to structural repairs, modifications and part fabrication.
Skills : Structures Mechanic, CNC Machinist.
Description :
Performed Structural modifications on B300 King Air.
Repaired to all damaged and fouled stringers as well as reinforcing them.
Installing doublers and triplers throughout the aircraft for the addition of modified equipment.
Removed, replaced, and repaired panels from the King Air due to gouges and dents.
Assisted in reinforcing the door web and upper frames to also allocate for modified equipment.
Assisted in the modification and installation of new antennas for the aircraft.
Fabrication of parts was also part of the daily routine.
Experience
5-7 Years
Level
Executive
Education
Technology
Associate Structures Mechanic Resume
Objective : Experienced structures mechanic with Air frame, and Security Clearance. Professional minded with strong leadership skills. Great attention to details and organizational skills and a great addition to any company.
Skills : Structures/Bonder, MS-Office.
Description :
Fabricated large and small parts per drawing and assembled parts as required.
Responsible for achieving production requirements.
Performed skin replacements and frame repairs with heavy modifications.
Worked on full aircraft paint jobs and touch-ups.
Various aircraft but not limited to B747, B727, MD90, DC10, DC9, and falcon jets.
Performed repairs and modifications using SRM, MM, IPC, ADs, EOs, and engineering requests.
Repaired, modified, and troubleshot airframe parts. Removed and replaced skin panels and aircraft fasteners.
Experience
2-5 Years
Level
Junior
Education
Diploma
Structures Mechanic Resume
Headline : Motivated self-starter with a can do attitude. Possess the ability to build and work as an integral part of a team to complete tasks with first time quality. Experienced in scheduled/unscheduled maintenance, upkeep.
Skills : MS-Office, MS-Excel.
Description :
Performed tasks per engineering drawings to layout, locate, and drill.
Modified and fabricated parts per engineering disposition.
Performed scheduled and unscheduled maintenance work on live aircraft.
Worked with structural parts that consist of composite and sheet metal.
Performed close tolerance drilling of holes. Was the lead mechanic on the fwd.
Performed the entire buildup of wings, fuselage, landing gear, and fwd and aft cockpit.
Ensured that all health and safety guidelines were followed.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
